Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Spray gun recommedation

Posts

Spray gun recommedation

#1

Spray gun recommedation

tom

I am getting ready to spray paint, base coat and clear coat, some bike frames. The HVLP guns I have now are all cup type guns. I would like a gravity feed gun, on the small side, for doing these projects.

Anyone have some suggestions?

Anyone selling??

Thanks!

Re: Spray gun recommedation

#2

Re: Spray gun recommedation

doug f, san clemente, ca

Take a look at this one. I've used it on numerous projects over several years with very good results. Simple to use, very easy to clean and inexpensive.

http://www.amazon.com/Critter-Spray-Products-22032-Siphon/dp/B00006FRPJ/ref=sr_1_1?s=hi&ie=UTF8&qid=1347925722&sr=1-1&keywords=critter+gun

Re: Spray gun recommedation

#3

Kneale Brownson

Critter is a siphon feed, not gravity feed


Re: Spray gun recommedation

#4

Jim DeLaney, Austintown, Ohio

Re: Spray gun recommedation

Jim DeLaney, Austintown, Ohio

The small 'touch-up' HVLP gravity fed gun at Harbor Freight actually ain't too bad. I use mine for spraying shellac, etc.

On the (much) more expensive side, the HVLP kit that Jeff Jewitt sells (Homestead Finishing) is really nice.

Re: Spray gun recommedation

#5

Re: Spray gun recommedation

Robby Wright in San Marcos, CA

Tom - The gravity fed HVLP gun I got from Rocklers for about $80 has worked really well for me. It does a decent job of atomizing, doesn't splatter, is easy to clean and easy to adjust. I have put several gallons of dyes and finish, including shellac, poly and analine dye. It comes with a 1.3mm tip that seems to work well for almost everything I shoot.

Robby Wright

Re: Spray gun recommedation

#6

Re: Spray gun recommedation

tom

Thanks for all the ideas!