Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Neat Propeller Video Series

Posts

Neat Propeller Video Series

#1

Neat Propeller Video Series

Tony - Memphis

This is a really neat series on making propellers for a wind tunnel. No wheels today, so I found this while looking for something to watch while I ate lunch at my desk. If anybody knows why my truck spins and spins but won't crank, let me know! Happened Labor Day weekend too. Spun it till the batery died, then came back hours later and it started. Has been starting and running fine since. Yes, it has spark. I can hear the pump cycle when the ignition is turned on. 2001 S10 with 142k miles. Time for a new one. Repairs are getting to be more than it is worth (needs spring dampers at $400 ea side too). I sure wish they made some small truck that got good mileage. The plain jane Toyota only gets around 20. My old inefficient V6 Chevy gets that!

Anywy this is neat...there is three parts (maybe some others)...

http://www.youtube.com/watch?v=l9UbnJlhrHA&feature=relmfu

Tony

Re: Neat Propeller Video Series

#2

craigd

Re: Neat Propeller Video Series

craigd

That was fascinating! Many 20' hand laid glue lams, micrometers, the biggest jointer I've ever seen, bench planes and spokes shaves, awesome wood working.

Re: Neat Propeller Video Series

#3

I want that jointer,

Keith Newton

until it comes to sharpening the knives. Not that I couldn't handle it, but I'd rather not have to deal with it, thanks.

I didn't pick up what glue they used, but,,,,,,, they could have surely used the extra time that epoxy gives over that glue.

Re: Neat Propeller Video Series

#4

That was definitely worth watching!

Bruce, a MN Galoot

It was a fascinating video, plus it warms the cockles of my heart to see them finishing those massive beasts with #4 planes and spokeshaves. It would have been good to see those propellers in use, though. And that jointer is really something else!!

I noted with some interest in a thread on the Home Shop Machinist forum that wood still is the basis for virtually all helicopter blades. There are only one or two helicopters, both experimental, that use anything besides wood. Nothing else can take the stress for continual flexing.

Re: Neat Propeller Video Series

#5

Re: That was definitely worth watching!

Chuck in Mtl.

I noticed one of the captions said they that white lead was used during the hole boring process or reaming process. I guess toxicity of this substance was not well known back then.

Re: Neat Propeller Video Series

#6

Re: Neat Propeller Video Series

Brian in SLO

I didn't see a single knot in any of the wood used.

Finding boards that clean nowadays comes at a premium!

Re: Neat Propeller Video Series

#7

Re: Neat Propeller Video Series

Joe Rogers, Northern Virginia

With regard to your truck... My sons 2001 S10 did the same thing. It needed a

fuel pump module. They get tired at abount that mileage.

Required some re-wiring at the connector due to upgraded wiring in the new part. Parts and connectors came with the module. The trick is to jack up the bed to access the sender instead of trying to muscle out the tank. Shop around for the part as the dealers markup is obscene. I'd fix it as the repairs will only ammount to 2 or 3 months payments on a new truck.

JR