Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Thanks for all the advice on HVAC

Posts

Thanks for all the advice on HVAC

#1

Bob

Thanks for all the advice on HVAC

Bob

I am going with a in wall unit like the ones in hotels the big reason is because of dust. I was told that the split unit will clog and cause water to run down the wall and they are not as easy to clean where as the in wall units can slid out onto a custom built by me dolly roll it outside and hose out the coils then when dry slide it back in and your up and running.

Re: Thanks for all the advice on HVAC

#2

Re: Thanks for all the advice on HVAC

Tony - Memphis

That's exactly what I do. I have a small unit that slides out (GE). I built a little stand that I can slide it onto and I take it out once in a while and clean it real good. I don't have near as much stuff on the inside as I do the outside. I keep a pleated filter over it when working. I think we have some cottonwood trees around here that clog up my coils in the spring. Its like the coils are coverded with a layer of felt.

Tony