Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Lettering router templates

Posts

Lettering router templates

#1

Lettering router templates

Mark

Looking for letter templates to use with a router.

I have seen the LV system and some others. All were pretty straight forward block letters. Is anyone aware of something with a little more style in a more classic looking font and where to get them?

Has anyone made their own templates and do you have any tips?

I am trying to make some older looking signs and wanted to rout the letters out.

Mark

Re: Lettering router templates

#2

Re: Lettering router templates

Gary Camp, Bend, Oregon

I didn't have much luck using the LV templates. I made a couple of signs for the kids wedding this summer. I found a font I liked on the computer, printed it out to the size I liked. then I used carbon paper and free hand trace a pattern on to my sign stock, I sweetened up the centerline of the letter with a pencil and routed them out free hand. At first I was not very pleased with the results, I found that the material makes a huge difference. I was using pine and helmock for test pieces. I remembered I had some western Red Cedar from and old sign and used the a piece of that, the reults were good enough I went ahead and used the test piece as one of my final signs. I made it look older by spraying the cut out letters with a dark contrast color (Navy blue in this case) and then scraping the background not quite clean.

It worked for me.

glc

Re: Lettering router templates

#3

Re: Lettering router templates

del schisler

i tried the Milescraft sign maker, forgot the model number, it was a little on the cheepie craft , If you get it polish the railes the router will slide a lot better, that was the first thing i done. It worked ok but just wasn't for me. 2 cents

Re: Lettering router templates

#4

Re: Lettering router templates *LINK*

William Duffield

They all look tacky and cheap. If you want to carve letters in wood, do it the right way. But first, choose a wood that works, e.g., basswood or mahogany.


Chris Pye, Lettercarving in Wood