Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

TOOLS EXPLAINED

Posts

TOOLS EXPLAINED

#1

Bob

TOOLS EXPLAINED

Bob

I am sure many of you have seen this so for you its a review, for those that have not you may learn some new uses for your tools

DRILL PRESS: A tall upright machine useful for suddenly snatching flat

metal bar stock out of your hands so that it smacks you in the chest and

flings your beer across the room, denting the freshly-painted project

which you had carefully set in the corner where nothing could get to it.

WIRE WHEEL: Cleans paint off bolts and then throws them somewhere under

the workbench with the speed of light . Also removes fingerprints and

hard-earned calluses from fingers in about the time it takes you to say,

‘Oh shucks!’

SKIL SAW: A portable cutting tool used to make studs too short.

PLIERS: Used to round off bolt heads. Sometimes used in the creation of

blood-blisters.

BELT SANDER: An electric sanding tool commonly used to convert minor

touch-up jobs into major refinishing jobs.

HACKSAW: One of a family of cutting tools built on the Ouija board

principle… It transforms human energy into a crooked, unpredictable

motion, and the more you attempt to influence its course, the more

dismal your future becomes.

VISE-GRIPS: Generally used after pliers to completely round off bolt

heads. If nothing else is available, they can also be used to transfer

intense welding heat to the palm of your hand.

OXYACETYLENE TORCH: Used almost entirely for lighting various flammable

objects in your shop on fire. Also handy for igniting the grease inside

the wheel hub out of which you want to remove a bearing race.

TABLE SAW: A large stationary power tool commonly used to launch wood

projectiles for testing wall integrity.

HYDRAULIC FLOOR JACK: Used for lowering an automobile to the ground

after you have installed your new brake shoes , trapping the jack handle

firmly under the bumper.

BAND SAW: A large stationary power saw primarily used by most shops to

cut good aluminum sheet into smaller pieces that more easily fit into

the trash can after you cut on the inside of the line instead of the

outside edge.

TWO-TON ENGINE HOIST: A tool for testing the maximum tensile strength of

everything you forgot to disconnect.

PHILLIPS SCREWDRIVER: Normally used to stab the vacuum seals under lids

or for opening old-style paper-and-tin oil cans and splashing oil on

your shirt; but can also be used, as the name implies, to strip out

Phillips screw heads.

STRAIGHT SCREWDRIVER: A tool for opening paint cans.. Sometimes used to

convert common slotted screws into non-removable screws and butchering

your palms.

PRY BAR: A tool used to crumple the metal surrounding that clip or

bracket you needed to remove in order to replace a 50 cent part.

HOSE CUTTER: A tool used to make hoses too short.

HAMMER: Originally employed as a weapon of war, the hammer nowadays is

used as a kind of divining rod to locate the most expensive parts

adjacent the object we are trying to hit.

UTILITY KNIFE: Used to open and slice through the contents of cardboard

cartons delivered to your front door; works particularly well on contents

such as seats, vinyl records, liquids in plastic bottles, collector

magazines, refund checks, and rubber or plastic parts. Especially useful

for slicing work clothes, but only while in use.

SON-OF-A-BITCH TOOL: (A personal favorite!) Any handy tool that you grab

and throw across the garage while yelling ‘[son of a beeoch]!’ at the top

of your lungs. It is also, most often, the next tool that you will need.

Now that you know the proper use of your tools

Go break something so it can be fixed

Re: TOOLS EXPLAINED

#2

Ellis Walentine

Oldies but goodies

Ellis Walentine

... and still funny. Thanks, Bob.

Ellis

Re: TOOLS EXPLAINED

#3

Bob

Re: Oldies but goodies

Bob

:D

Re: TOOLS EXPLAINED

#4

I always get a chuckle from these!


Re: TOOLS EXPLAINED

#5

The Original

Rod Peterson—Ormond Beach, FL

And still the best version. Written by Peter Egan and originally published in "Road & Track" magazine.

I have it on my website (with permission) at woodbutcher.net/tools.shtml

(for some reason, I am no longer able to embed a link or even use HTML in my posts)

Rod