Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

clock pendulum question

Posts

clock pendulum question

#1

clock pendulum question

Jerry Gibbs

I installed a cheap quartz pendulum movement in a clock I built. The clock keeps good time, but the pendulum barely moves, as in 1/4" at the bob. The distance between the center of the movement and the center of the bob is 8". Is this normal?

Re: clock pendulum question

#2

Re: clock pendulum question

Tim Caley

I would think that on a quartz movement, the pendulm is just for visual enjoyment and doesn't really have any function in making the clock keep time. Therefore, the swing of the movement would not need to be very large. But, I think that it should swing more distance than what you mentioned. Can you possibly return it and try another one, and see if the one you have is just faulty?

Re: clock pendulum question

#3

Re: clock pendulum question

John McGaw

What are the specifications of the movement? I don't have a huge experience with quartz pendulum movements but a quick look at some supplier websites suggests that 19" is a typical pendulum length for a quartz movement. This might explain, at least in part, why your swing is reduced.

Re: clock pendulum question

#4

Re: clock pendulum question

Bill Howatt

Did you give it a push to get it going? I usually have to do that with mine. As said, it has nothing to do with the time-keeping.

Bill

Re: clock pendulum question

#5

Re: clock pendulum question

Howard Norman

Two things come to mind. One the movement may be defective, second the movement may be made for a much longer pendulum length.

I have only used one quartz pendulum movement but it swings a couple of inches.

Re: clock pendulum question

#6

length of pendulum

Jerry Gibbs

the hanger is adjustable and could have been significantly shorter. I am going to call customer service Mon and see if I can get an answer. Jerry

Re: clock pendulum question

#7

Re: clock pendulum question

del schisler

i didn't read the other post but the length doesn't have any thing to do with the time in a quart's movement. The movement should said what length of the pendlum rod. If to long it will not swing. if to short it will swing to much back and forth. I will read other post's now I have used this combo for yrs sence they first came out

Re: clock pendulum question

#8

Re: length of pendulum *LINK*

del schisler

I read the other post's. The movement's come with different's lengths you can get not one will do it . Here is a web page to get a idea. I been in clock's for 60 yrs or so but have done lot's of quarts movements.


http://www.klockit.com/depts/PendulumMovements/dept-380.html?utm_source=google&utm_medium=cpc&utm_term=Pendulum%20Movements&utm_content=!acq!v2!s-siteLink-79326&utm_campaign=Klockit%20-%20Brand%20(LD)&gclid=CKObuo-L4rECFeURNAodRkkA3g

Re: clock pendulum question

#9

Heavyweight pendulum

Lee Schierer McKean, PA

As others have stated, on a quartz movement, the pendulum has nothing to do with time keeping, it is purely decoration.

It is likely that your pendulum is too heavy for the movement to power for proper swing. You can try starting the pendulum by hand, but it will likely slow down after a period of time to what you see now if it is too heavy. If it is too heavy, changing the length will have little effect on it swinging. The impulse applied by the movement is quite small and excess weight would cause it to be too weak to swing the pendulum.

This assumes your movement is hanging plumb.

Lee

Re: clock pendulum question

#10

movement was not level