Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Carpenter Level?

Posts

Carpenter Level?

#1

Carpenter Level?

Charles Jackson III

I am looking at getting a Carpenter Level for leveling walls, doors, and windows. I am wondering what the best all around size to get? I am looking at a 2 foot level with a straight edge.

Re: Carpenter Level?

#2

Re: Carpenter Level?

Howard Norman

I can't say what the "best" length. The first one that I bought many years ago was a two foot model. Then later I purchased a four foot model. If you don't have a carpenters level than I would say a two foot one is a good start anyway.

Re: Carpenter Level?

#3

two are handy

Bill Tindall

a short one (2' or so)and a long one for the vertical measurements. The long one also makes a handy straight edge.

Re: Carpenter Level?

#4

plumb bob is better


Re: Carpenter Level?

#5

Re: Carpenter Level?

Mark Nowicki

A six footer and a two footer. Mine are Empire.

Mark

Re: Carpenter Level?

#6

JL

Re: Carpenter Level?

JL

I vote with Mark. A two foot level for the short stuff and a 6' level for doors, frames and what not. If expense is an issue, than 4' will work okay.

Re: Carpenter Level?

#7

Re: Carpenter Level?

Yonak

I find a 4' handy as I can also use it to draw a straight line across a sheet of plywood, such as for a nailing guide.

Re: Carpenter Level?

#8

Re: Carpenter Level?

Brad Chenoweth

My own personal favorite is my 59" Stabila Type 196 for general work (also makes a great straight-edge for marking sheet goods). As was already mentioned, a plumb bob is the best tool for plumbing walls, and a 6+ footer is the best choice for doors.

Re: Carpenter Level?

#9

Re: Carpenter Level?

Charles Jackson III

Is a 2 ft and a 4 ft Mahogany Level a good choice?

Re: Carpenter Level?

#10

Re: Carpenter Level?

Yonak

Just don't get a Tate's, if their levels are anything like their compasses.

Re: Carpenter Level?

#11

Re: Carpenter Level?

steve mackay

4', mahogony, brass bound, rubber end caps, 3 vials. I can sling it about anywhere and look good do'n it. Anything smaller gets a torpedo.

Re: Carpenter Level?

#12

Re: Carpenter Level?

Keith Newton

That has been what I have used for about 40 years, and will take care of most jobs. Of course, I have some other ones too, but those are most used. One thing nice about the Mahogany, is the insulating quality of that stable wood. On a really cold day, aluminum is a great conductor, so it will suck the heat from your already cold hand, then on a really hot day burn the crap out of it.

But as others have mentioned, a 4' aluminum level, makes a great straight edge for marking across sheet goods. But then again so does a drywall square.

In recent years though, I'm finding my iPhone handy level carpenter app is really handy, especially for finding slopes as well as level. It will tell the number of degrees, which is handy when cutting angles, or even figuring the height of something, if I know the distance from my site line.

Re: Carpenter Level?

#13

Re: Carpenter Level?

Charles Jackson III

I am looking at getting the Stabila 37816 48-Inch and 16-Inch Aluminum Box Beam Set from Amazon.com Made in Germany Life Time Warranty.

Re: Carpenter Level?

#14

Re: Carpenter Level?

Rusty

There are electronic ones that are easy on old eyes. You use the longest level that fits or might have to quickly check level along the length of a longer item.