Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Grizzly Table Saw

Posts

Grizzly Table Saw

#1

Grizzly Table Saw

vance hough

I am considering buying a 10" Grizzly table saw for my flooring business primarily to edge cut oak risers and make oak treads. I am considering the 3hp or 5hp model. I would like to know about the quality and performance of the saw.

Any comments would be appreciated.

Re: Grizzly Table Saw

#2

Re: Grizzly Table Saw

Dick Coers

Personally, I would not buy anything with a cord on it from Grizzly since I bought a really horrible 19" band saw. I returned it after working on it for a couple weeks, replacing parts. But for the tolerances you would need, it should work okay. The motors and bearings may not hold up to production. Get a power feeder if you will making a minimum number of set ups.

Re: Grizzly Table Saw

#3

Re: Grizzly Table Saw

Rick Snyder

I have four Grizzly floor machines, a 3hp cabinet table saw, 8in jointer, 17 in bandsaw, and a 15 in planer, and all have preformed very well. All of the machines are used every day. The 3hp t-saw has plenty of power.

Rick

Re: Grizzly Table Saw

#4

JL

Re: Grizzly Table Saw

JL

I've used my friend Mike's G1023 3 hp cabinet saw - works quite well. He's had his for many years. He makes his living working wood and he has had no complaints. The G1023 is effectively a clone of the old Delta Unisaw.

I would say that you might consider getting the Grizzly G0690 or G0691 as they have riving knives.

Re: Grizzly Table Saw

#5

Re: Grizzly Table Saw

C. John Hebert

My whole shop is grizzly and never had a problem with anything. Wouldn't hesitate to buy something else from them. I'm a pro cabinet maker

Re: Grizzly Table Saw

#6

Re: Grizzly Table Saw

Joe in a Cleveland suburb

I've had a 1023SL for about 10+ years.

Typical weekend work.

No complaints.

Well, there is one. It's always had a small vibration that I could never figure out. At least it's never been as vibration free as my dad's Unisaw was.

I would buy again.

Re: Grizzly Table Saw

#7

Love it, love it, love it . . .

steve mackay

industrial strength on a budget ! And their customer service is up there with Lee Valley !

As for accuracy and tolorances, hows this ? :


Re: Grizzly Table Saw

#8

Re: Grizzly Table Saw

Larry Clinton At Frankfort, (Central) Indiana

Vance, can't comment on the Griz table saw (I have a Unisaw), but can say I have owned 2 Grizzly joiners and the 3 hp Grizzly Cyclone dust collector. I did have some minor problems with the dust collector - but they responded quickly and sent me all the parts I needed. I think they have some of the best imported equipment available at reasonable prices with a good service organization. I would figure on buying a Forrest blade for the Grizzly saw if you want the cleanest cuts. As to Horsepower, mine is a 3 hp, and will cut through Oak 3" thick without any problems at all. The only thing you might gain with a five is a slightly faster feed if you install a power feeder and are cutting very thick (>2" material) and the high hp does allow for cutting with a dull blade. This is not an issue for me as I am a hobby shop user and would never use a dull blade due to cut quality. It can be for production shops where they have a full time man on the saw and don't want any downtime.

Re: Grizzly Table Saw

#9

RUN, DON'T WALK

Terry Quiram

Avoid Grizzly like the plague. They have some of the worst customer service I have ever seen. I bought a milling machine from them. The motor burnt out within 2 months. When I called they told me the motor was backordered for 6 months. Turned out to be closer to 8. I ended up paying to having the motor reround. I later learnt that Griz would have reround the motor as part of warranty. I talked to the service dept 4 times and was never told this. I was sent a survey about the customer service on the motor when the machine was over a year old. I unloaded on them. I received a call from a rep stating that

Griz would make it up to me since I had spent $100 of my own money to fix the motor. I got a phone call 3 weeks later and they stated since my claim was over a year old all they would do for me was a free hat or T shirt. I told them no thanks. Again let me say do not do business with Grizzly!!