Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Project pix

Posts

Project pix

#1

Project pix

mdclor

I have seen pix of completed projects that only show the item and have a completely white background. How is this done? Is this something that a person with only a "point and click" skill set can accomplish? Here is an example.


TIA,

Merle

Re: Project pix

#2

Re: Project pix *LINK*

Dave Paine

Point and click skills - plus some software.

Ideally the piece is photographed on a flat white background. If so little processing is needed.

If the piece is not on a white background, then you need software which will allow "masking" the item which can then be copied to a new file.

Masking can be manual - you essentially draw around the outline. The cutting board example would be easy. People, animals, plants etc. are not so easy due to many edges.

The more advanced software will allow you to specify a colour and then the software will mask similar colours. Sounds easy, but even your cutting board example is not a single colour. Many shades of orange/brown.

Most software will allow you to edit the mask, and so you can manually add or move areas.

The software is normally a graphics program, such as Photo-Shop or Corel Draw or PaintShop Pro. The latter is normally the least expensive. I see Corel has now purchased Paint Shop Pro. The program is still inexpensive. $50. See link.

In PaintShop Pro, they appear to be calling their masking feature "Smart Carver" and they have trademarked the name.


http://www.corel.com/corel/product/index.jsp?pid=prod4220093&storeKey=us&trkid=NASEMGglDM&gclid=CMCHyvSosLECFYio4AoduwUAAg#power

Re: Project pix

#3

Re: Project pix

mdclor

Dave,

Thanks for the info. I noticed that Paint Shop Pro has a free trial so I don't have much to lose except shop time while I learn how to use the software. :)