Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

De Walt Saw clamp

Posts

De Walt Saw clamp

#1

De Walt Saw clamp

Frank Grambo

Gentlemen,

Take a look at these pics. I found this clamp at an auction a couple of years ago and recently had the need to hold down some 5 inch wide ( and long) material. I anguished over how I was going to hold down the stock and came across my almost forgotten auction clamp. It worked perfectly. The black handle has the same grip pattern on it as the saw's position securing handle.

I looked for quite a while on the internet to see if this was an optional clamp for this popular De Walt chop saw. I cannot find a reference to the horizontal clamp anywhere. I live about 35 miles from the B and D production facility and I can only surmise that it was made there and never made it into production.

It looks like a tremendous stroke of luck. Has anyone used or even seen this accessory ?

I have included a photo that I have hosted on photobucket ... hope it works.


img

Re: De Walt Saw clamp

#2

Re: De Walt Saw clamp

Jason Waters

It was sold as an accessory. I have one. From prior to 2000, it's from that long ago. They also made crown stops too. and a top hold down clamp. And a repeatable depth gauge.

The clamp shown is the one I use most.

Re: De Walt Saw clamp

#3

Re: De Walt Saw clamp

Jack Prescott

I too have one of those clamps that I purchased at least 10 years ago when I bought my DeWalt Saw for Home Depot.

Re: De Walt Saw clamp

#4

Re: De Walt Saw clamp

Jason Waters

I think I have nearly every accessory for my 12" DeWalt. Extension wings on both sides, crown stops, horizontal clamp, veritical clamp, and length stop.

I have used all of them. The crown stops the least. and the vertical clamp the least. But all have been helpful. I think I bought 2 or 3 of them from Builder's Square when they went out of business. I know I bought one extension wing (the left) from Home Depot when I got the saw (later they came with one free).

I still have new Bosch Jigsaw Blades from Builder's Square, bought at 75-90% off.

My miter saw has well earned it's keep, and thanks to my uncle, who told me to save up for a 12" (which it took me a long time, because I had a tablesaw), it has been one of my best purchases, and the 12" has been well worth it. It has done many jobs, many places, and I don't do it for a living.