Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

glueing on numerals

Posts

glueing on numerals

#1

glueing on numerals

Jerry Gibbs

I am making an arts and crafts style clock. The frame is red oak and the face is red oak veneered plywood. I have to make my own numerals, which are Dard Hunter font. They will be either plastic or aluminum. Right now, I have a practice piece of oak with some darkened garnet shellac which I like for color. Is there any trick to glueing the numerals to shellac? I can cover the shellac with a satin or semi-gloss poly if needed. The problem with a test glue-up is that I don't know about longevity. On the other hand, if the numerals stick, there will be almost no stress on them. Am I overthinking the problem? Thanks for your thoughts. Jerry

Re: glueing on numerals

#2

Re: glueing on numerals

Dave Paine

I have not experienced any problem in gluing to a stable non-wax finish, whether shellac or other types.

You are only needing to hold against gravity. This should work. A light manual sanding under the numeral will not hurt.

Re: glueing on numerals

#3

shellac is dewaxed


Re: glueing on numerals

#4

Re: glueing on numerals

Dick Coers

I would try to place them in wet shellac, no glue necessary. Another idea would be to place the numeral on dry shellac, and inject some alcohol under the numeral to melt the shellac to the numeral.