Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

How to attach wood to brick...with no fasteners!

Posts

How to attach wood to brick...with no fasteners!

#1

How to attach wood to brick...with no fasteners!

Terry Alexander

We have a gorgeous walnut front door. We purchased a storm door for the outside so that we can open the walnut door and have a beautiful view of our place. Problem is that the bottom of the storm door does not meet the threshhold. So right now we have a towel stuffed in the gap just to keep our expensive air conditioning in.

I need to plane a piece of wood 5/8" thick, 36" long and 2" wide. I need to attach this to the existing exterior brick threshhold. I can't think of a fastener that would look "good", so I am thinking of some kind of adhesive.

I am looking for a solution (or solutions) to this problem. I am not opposed to mechanical fasteners....just want the finished product sealed against the elements and attractive.

As always...thanks in advance!

Terry Alexander in West Texas

Re: How to attach wood to brick...with no fasteners!

#2

Easy

Mark Mandell - Gone Round In New Jersey

Clear silicon caulk.

Re: How to attach wood to brick...with no fasteners!

#3

Or polyurethane caulk

Bill Houghton, Sebastopol, CA

Poly caulk is paintable and sticks to just about everything, including your fingers and clothes, in my experience. Tool it with a wet rag soaked in mineral spirits.

Re: How to attach wood to brick...with no fasteners!

#4

Ditto what Mark said

John Lucas

You will have to find a way to hold it in place until the glue dries but clear silicone caulking is very long lasting, stays flexible, and holds well.

Re: How to attach wood to brick...with no fasteners!

#5

Bob

Re: How to attach wood to brick...with no fastener

Bob

I had used construction adhesive on brick and wood, brick mold in fact. Trowel it on the wood with a notched trowel like you would with tile then caulk it and paint Its still up no sign of coming down

Re: How to attach wood to brick...with no fasteners!

#6

Re: How to attach wood to brick...with no fastener

William Duffield

3M 5200. This is what the sailboat builders use to attach centerboards to hulls, and that's about the toughest conditions this side of outer space.

Your threshold will be trod upon by family, friends, pets and Mongol hordes. You'll roll refrigerators and heavy furniture, and maybe someday an industrial SawStop over it. Rain, wind, snow, ice and CMEs (well, at least UVA an UVB) will try to work their way around and through it. It will be subject to the worst abuse you and Mother Nature can dish out, so you need the best adhesive you can get.

Also, a high quality spar varnish would be appropriate for the finish.

Re: How to attach wood to brick...with no fasteners!

#7

Re: How to attach wood to brick...with no fastener *LINK*

Jim Dillon

Hi Terry,

I would not hesitate at all to use one of the better quality construction adhesives for your application. While I have no experience with your brick/wood combination, I have glued several homemade wood thresholds to plywood (or ceramic tile) and have had no problem over 10+ years. In fact the last adhesive I used (something called "heavy duty" from the local Borg) stuck so well and so quickly that any excess was really difficult to remove.

William mentioned the 3M 5200 product. I have no experience with it, but Jamestown Distributors is having a sale on it. Their catalog is worth getting for an array of high quality marine products/finishes. Hope this helps.

Jim


Jamestown Distributors

Re: How to attach wood to brick...with no fasteners!

#8

Re: How to attach wood to brick...with no fastener

Mark Nowicki

Re-install the storm door 5/8" lower?

A new threshold for the storm door?

http://pemko.com/

Mark

Re: How to attach wood to brick...with no fasteners!

#9

Seconding construction adhesive

Yonak

I have been finding more and more uses for construction adhesive. Not long ago I would never have considered construction adhesive only for attaching molding that gets handled, and I don't know how long the bond will last in the long run, but it really holds fast. It's pretty inexpensive and a good bit less messy than caulk.

Re: How to attach wood to brick...with no fasteners!

#10

Re: How to attach wood to brick...with no fastener

Barry Irby

I agree with Mark....Wouldn't it be easier to attach a sweep to the door than to attach a sill to the brick?

If you must attach the sill to the brick, be careful not to set up a situation where water will pond behind it and soak in and rot something.

And either PL 500 or 3M 5200 will work. Be careful to read the instructions. IIRC 5200 takes a week to set and acquire full strength. PL400 will work, but the 500 version is made for wetter locations.

Re: How to attach wood to brick...with no fasteners!

#11

Bob

Re: How to attach wood to brick...with no fastener

Bob

Right, I forgot all about 5200, Great stuff. I don't know if it holds better then construction but it sure works on boats.

Re: How to attach wood to brick...with no fasteners!

#12

Ellis Walentine

A few more thoughts

Ellis Walentine

A threshold is a special design case, as it will be exposed to untold foot traffic, often with various kinds of grit on people's shoes, as well as compressive loads that will want to dent the wood and ruin any finish. Further, I've never found a clear, film-forming finish that lasts for more than two years when exposed to UV and exterior conditions -- most last one year at most.

So, here's my take: Use ipe, and either paint it with some bulletproof garage floor paint or leave it natural and use a penetrating oil finish on it. Glue it down, as others have suggested -- my choice would be polyurethane construction adhesive, as I've had lousy luck with silicone caulks adhering. You can use little shims between the threshold and the door bottom as your clamping force. I'm assuming you will also be using some kind of rubber door sweep on the bottom of the door to seal any remaining gap to the threshold.

Ellis