Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Finishing OSB

Posts

Finishing OSB

#1

Finishing OSB

Gary Evans

Hi all,

I have a ceiling in my shop that was done in OSB. I want to paint it, but I'd like to fill some of the voids so it doesn't look quite so much like OSB. Anybody done this? I found a masonry paint that is designed to fill the voids on concrete block, but I'm afraid it might not be flexible enough to last on a wood ceiling.

Any tips would be appreciated.

Gary

Re: Finishing OSB

#2

Bob

Re: Finishing OSB

Bob

Try mixing the paint/primer with drywall compound and a heavy nap roller, after its dry give it a second coat of semi-gloss.

Re: Finishing OSB

#3

Skim coat with joint compound?

Bill Houghton, Sebastopol, CA

Not a fun project, but I'd consider void-filling separately from painting. You might be able to get a good surface with joint compound.

Re: Finishing OSB

#4

Re: Finishing OSB

Jerry Gibbs

How about covering the ceiling with pre-painted luan underlayment? You would have to pre-paint the luan.

Re: Finishing OSB

#5

Try the paint

John in NM

Should be flexible enough if it's latex. Worst case it looks like painted OSB, which probably it will. I hate to say it, but if you don't want the ceiling to look like OSB, best solution is to use something else for the ceiling, like luan or drywall.