Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

WC Weekend Accomplishments......

Posts

WC Weekend Accomplishments......

#1

WC Weekend Accomplishments......

Dennis E Peacock

2 July 2012

Good Morning Everyone,

First of all, my heart and my prayers go out to all those who have been affected by the wild fires. I am truly saddened by this in anyone's life. My hope and prayer is that it will rain very soon....for all of us.

Got the shop a bit more cleaned up and I'm really liking the way it's improving. After all the family issues, family deaths, and spending MANY hours on the road travelling for family over the past 3 years has really taken its toll on my and my family.....financially, physically, and emotionally. It's just taken me so long to pull out of all this for me to even have a desire to get back in the shop again. Do you ever feel that way? I know I do and I have been. Now, as time has passed, by desire is returning to the point where I want to get out there again, but I know I can't until the seasonal temps start cooling off again. It stays almost 118º F in my shop and that's just too hot to work in, so I will be taking care of work and other things until I can get the time and welcome cooler temps to get back in the shop again and make some sawdust.

Well, it's back to the day job today and since we are still needing rain...I don't have to cut my grass because it's dead. If you have any extra rain? Please send it my way.

What did YOU do this past weekend?

Best of weeks to you all.

Dennis Peacock

Re: WC Weekend Accomplishments......

#2

Re: WC Weekend Accomplishments......

Don Orr

Glad things are settling down for you Dennis. My heart goes out to the fire victims as well as the storm victims from the midwest to the eatern seaboard. Ove 2 million without power, trees down everywhere. Mother Nature is at it again!

I finally finished up our basement door project. Got the trim done and rebuilt the landing. I was supposed to have it done in April! :( :\

Sunday was breakfast and canoeing with some woodturning friends. Went home and started building a rack to hold my canoes in one place. Got the uprights mostly done. Need to get a few bolts and should be able to finish it this week as there may be another canoe coming. :D

Happy Birthday America!!!

Re: WC Weekend Accomplishments......

#3

Ellis Walentine

Re: WC Weekend Accomplishments......

Ellis Walentine

Hi Dennis,

Wow, 118º in the shop! That would be more than hot enough to discourage me -- or make me get an air conditioner. We've had hot weather here in PA, too, but nothing like you guys down in the center of the country. Back in February, when we were having April weather, I was afraid that this summer would be a scorcher. Looks like that fear is coming true.

We had a weekend of entertaining friends and relatives, with dinners here on Thursday, Friday and Sunday. I'm just about cooked out and ready to tackle another week. It is shaping up to be another fairly hot one (90's) with another heat wave next weekend.

Woodworking was minimal this weekend, though I made some progress on a big white ash bowl I've been working on. Right now, I'm having some back trouble, so I'll be taking it a little easy this week.

Ellis

Re: WC Weekend Accomplishments......

#4

Re: WC Weekend Accomplishments......

John McGaw

No woodworking accomplishments this weekend unless you'd count keeping an erstwhile woodworker from expiring in the heat. It was officially up to 105F (about 40C) this weekend and humid to boot. Although the highly-calibrated thermometer in my back yard only got up to 98.7F it was more than enough to put me into hibernation mode. I managed my time at the track both mornings but it was entirely too warm, even at sunrise, to make it pleasant.

Re: WC Weekend Accomplishments......

#5

Re: The Weekend

Mark Mandell - Gone Round In New Jersey

Saturday got my load of walnut up to the sawyer and went over how I wanted it cut. Got home and knocked a few off the Honey-do list, than it was time to fire up the lathe for the first time in many moons. Good to be making shavings and chips again.

Got a spindle repair/replacement job done for a family member. The heat in the garage called an early end to Saturday's fun, but Sunday morning I got two ginger jars roughed out of box elder.

Now it's back to the grind . . .

Watching (and hoping) the folks in Colorado. Saddened but also a bit angry at the losses. We expand our communities into areas of real danger from natural causes, but people invest in the properties with little or no knowledge of the risks they take. I have to wonder how many of those devastated Coloradans would have bought/built their homes in the middle of a wildfire zone if they'd known. Wild fire is an natural and needed part of the ecology of the mountain forests, and given the right conditions, will occur everywhere sooner or later in the mountains.

I wonder if, after this disaster, people will learn. I remember seeing the results of wildfire in the LA area where homes with ceramic tile or slate roofs survived while their neighbors' with fashionable (and cheaper) "modern" shingles burned to the ground. We can't prevent the fires, but it seems that we aught to be able to prevent the loss to life and property that goes with them.

Re: WC Weekend Accomplishments......

#6

Mudding and taping...

John in NM

Blaaaahhhh :D

Trying to get a bunch done before my wife comes home from vacation, normally she does the mud work, figuring my time is better spent on stuff she can't do. She doesn't like it though, so I thought I'd shoot for a nice welcome home surprise.

Lost another cat to coyotes Saturday, second this year. He at least had a long and happy life, but I still miss him.

Re: WC Weekend Accomplishments......

#7

Alan Young

A distressing project

Alan Young

This weekend I was doing finish work on a Farmhouse styled table. The top is made from Hickory -1.5" thick 42"wide and 60" long with breadboard end. It is massively heavy for one person to move around-even me at 6'3". This is one of those projects that reminds me how nice it was to have two sons living at home-available to help move a piece around in the shop.



The base for this table is poplar. The legs are 4" square lamination's then tapered.The aprons are 1.5 inches thick with a hand milled bead. I have attempted my first "distressed" finish on this piece as per the clients request.


I applied two coats of primer, and then two coats of enamel to the base . Then I sanded back in somewhat random areas and applied a water based glaze.-Van dyke Brown from General Finishes.

That was applied with a foam brush then wiped/rubbed off.




The next/final step is to apply a wb polyurethane to the base and the Hickory top.


Re: WC Weekend Accomplishments......

#8

Re: WC Weekend Wax on-Wax off

George Colonel's Workshop-Havertown PA

Good Afternoon Dennis,

It surely was hot here as well, though not the 118 degrees in my shop, which is within the scope of my home central air conditioning. I spent a lot of time doing the final finish, rub out and paste wax on our new cherry TV table.

It measures 43 1/4" long, 15" wide, and stands 22 1/4" high. Legs are 1 1/2" square and chamfered on all corners, also tapered from beneath the shelf.

My #5 son Steve arrived from DC area. He was without power and broiling in the heat. Our #2 daughter Lizzy arrived from Silver Spring, MD with her three kids. They too were seeking refuge from the heat and lack of power. Sunday we had everybody filled up with bbq and cooled down with Sierra Nevada or Urquel Pilsner. It was a great weekend for me. Keep cool.

George

Re: WC Weekend Accomplishments......

#9

Re: WC Weekend Accomplishments......

Joseph Mulherin, Sr

Been working on my rocking chair. Setup the table saw and dadoed the seat per Charles Neil's method. Still have to sand the contours on the edges; then drill the back brace holes in the seat. Cut the slots for the legs to fit into the seat and they do fit nicely....will epoxy when installed. Next is to make the headrest.

All or most of the parts have been cut and preformed and am ready to assemble....possibly next week.

Sorry, no pictures....still cannot get it thru my head how these programs work....but am still taking pics so might post later.

Re: WC Weekend Accomplishments......

#10

Standing...

Tony - Memphis

On its own four feet! This is a small table I am building to go between the two chairs I made not too long ago. It was exciting to get the tenons done and see it stand. I have some fitting to do and a bead to make for under the skirt and, of course, the top. The top will be a radial pattern of figured makore with a border of satinwood (cross banding). Or at least that's the plan! We'll see how that works out. The legs are honduran mahogany and the veneer is african mahogany (striped). The skirts are brick laid poplar. It will match up well after stain. I've used this combo before with good results. The stripes are really nice when finished. The whole affair is 24" tall or so I think. I made it the same height as the arms of the chairs (seat around 17" and arm another 7" or so).

Oh, this is not glued, so don't mind the gaps! It closed up pretty well with a band clamp. I'll tweak it a little more to try and get nice tight joints. Getting all of that to line up was very tough!


Re: WC Weekend Accomplishments......

#12

Re: A distressing project

Andy Lincoln,in Dearborn MI

Alan,

The table looks great.I think the distressing turned out great.

I do think it would be easier to lift the table if you removed the yellow steel

leg stretchers :-)

Re: WC Weekend Accomplishments......

#13

sharp looking table

Bill Tindall

Clear off the TV and it will make a great buffet tables for your get togethers.

Re: WC Weekend Accomplishments......

#14

Very nice - question...

Joe in a Cleveland suburb

That's a very nice looking table Tony. Great work.

What will the top look like? Will it be round? Will the edge be profiled? If so, how will you put a profile on it?

Thanks.

Re: WC Weekend Accomplishments......

#15

Nice work Tony

John in NM

Little tables are a lot of fun, they were my favorite thing to make when I made a lot of furniture :D

Re: WC Weekend Accomplishments......

#16

Re: WC Weekend Accomplishments......

Joseph Mulherin, sr

Yesterday I finished up sanding the curvature on the seat. Then cut the boards for the headrest, glued them together and am going to layout the holes for the back braces in both the headrest and the seat...drill them to allow for movement front to back....braces are NOT glued into either...just set with wax to fill in the holes, yet allow the movements when sitting in the chair. Still working on it, but a little slower since the left knee is giving me some problems. think the ligament has been strained and it feel like it is bleeding...warm sensation down leg...will see Orthopedics on July 30th and determine what has to be done.