Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

wood filler

Posts

wood filler

#1

wood filler

Jack Putnam

I am working on a project and when I drilled some holes in the pine I noticed that some of the wood around the holes broke off. In order to fill in the area that broke off what is the best wood filler to use?

In the past I have used plastic wood filler and it seems to work ok. But is there someting better that can be use on any type of wood? It will be primed and painted next. Thank You for your help.

Re: wood filler

#2

Re: wood filler

John in NM

For painted work Bondo works well on small fills. I've filled some big knot holes with it and found it didn't adhere too well for that (but these were 1"-2" fills). Never had a problem using it on small details like you describe.

Re: wood filler

#3

Re: wood filler

Keith Newton

I like the lightweight spackle. It dries fast, sands very easily. If it is in a spot where I think it needs to be tougher, I soak it with a little CA, which also dries fast.

Re: wood filler

#4

Kneale Brownson

Re: wood filler

Kneale Brownson

I use Durham powdered wood filler if I'm going to paint. Mix the required quantity with a little water and fill away. Sands fairly easily.

Re: wood filler

#5

Timber Mate

paul in AZ

Water mixable; doesn't shrink; comes in several colors and can also be tinted.

Re: wood filler

#6

Second the Timber Mate

Dave Paine

I have this and like it. Good shelf life. Easy to apply. Can be tinted. Low odor.

What's not to like? Well it is not fast. Takes awhile to harden and should not be attempted to be sanded before it sets. DAMHIKT. :\

Re: wood filler

#7

Timber Mate too, but....

David Yoho

I've been a Timber Mate convert for some time now and love the stuff. It is what I would use for something like you have because I have it in various colors already on hand.

However, if I didn't already have it and since you're painting, I'd probably go the cheap and simple route and mix some glue and sawdust up and fill the area. Once dry, sand and it's ready for priming and painting.

Re: wood filler

#8

Re: Timber Mate

Jerry

Third the Timber Mate