Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

5 cut method for making a panel sled

Posts

5 cut method for making a panel sled

#1

Bob

5 cut method for making a panel sled

Bob

I don't know how meny of you know about William Ni School but he has a killer video on YouTube http://youtu.be/UbG-n--LFgQ

building and zeroing in a panel sled. I made one today and nailed it at less then half of one one thousands here is mine.

Re: 5 cut method for making a panel sled

#2

Jesper, Denmark

Re: Excellent vid. Thanks


Re: 5 cut method for making a panel sled

#3

Ellis Walentine

Good video

Ellis Walentine

Ng has excellent camera presence and explains things very thoroughly. His five-cut method is empirically sound, but it seems overly complicated. F'rinstance, once you've cut your initial kerf in the base, why wouldn't you just put an 1/8" shim in the kerf and use an accurate framing square to adjust the fence square to the kerf? It would save a lot of cutting, measuring and calculating. You could test out your results with just three cuts, checking by eyeball to see if the fourth edge of your test piece was flush with the kerf. I guess the advantage of Ng's method is that it takes out the guesswork of dialing in the accuracy.

Ellis