Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

outdoor fly rod holder

Posts

outdoor fly rod holder

#1

outdoor fly rod holder

Jack Putnam

I am working on a fly rod holder for outdoors. I am using a combination Pine and Baltic Birch Plywood. I am going to use a primer on both types of wood first then sand lightly to establish a base for the final coat. My question is I would like to give the wood a little texure over the top of the primer.

I was thinking something like Gesso like artist use on their canvas. Not to rough just something that would make it a little different and fairly smooth when you picked it up. Then I was going to spray paint it black.

Is there some kind of material with a texture I can us? Iv'e tried using the rubber spray for the final coat, but it comes out of the can too fast and you have to hold it back further than regular spray paint

it ended up in a mess.

Maybe something in a spray can or that it can be brushed on but be able to cover all of the wood and not show the grain. It also has to be water resistant.

I would appreceate any help I can get at this point. Thanks a lot.

Re: outdoor fly rod holder

#2

Re: outdoor fly rod holder

Ray - Middletown, in

Do a search for Hammerite. Leaves a very nice texture and is rock hard when dry. Somewhat hard to come by but worth the search and it comes in spray cans as well as quarts and gallons.

Ray