Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

OT-Screen Cleaning

Posts

OT-Screen Cleaning

#1

OT-Screen Cleaning

Mark Mandell - Gone Round In New Jersey

Ever get paint or wood finish on a window screen that then dried? Solvents can melt the screen as well as the paint/varnish, but if you sponge some mineral spirits (a light oil diluent) on the spots and allow to soak in a bit, you may be able to use high pressure air from a compressor to simply blow the offending stuff off the mesh. Got some poly on a screen, but the MS and the blow gun got the screen clean with no damage to the mesh.

Maybe I should send this to Martha Stewart or Heloise . . .

Nah

Re: OT-Screen Cleaning

#2

Re: OT-Screen Cleaning

Joseph Mulherin, Sr.

Use an old painters "tool" to keep from getting paint on any adjoining surface....

use an old window blind slat to run along side the screen edge along with the paint brush

Re: OT-Screen Cleaning

#3

True, But Not

Mark Mandell - Gone Round In New Jersey

This stuff got dripped down the middle of the slider screen doors from above.

[opps :( ]