Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

squared

Posts

squared

#1

Moses Yoder

squared

Moses Yoder

How do you post numbers to a higher power on message boards? I have looked at character map with no luck. Also if you write 3rd in Word, space, and the rd goes smaller you can back up and enter 2 and it puts it to the higher power. When I copy and paste this into the post window it just goes back to 32.

Re: squared

#2

Re: squared

Bill Turpin in WNC mountains

Type your number to square, then cntrl and shift and + on the main keyboard at the same time. Then type 2.....x2. does not work for WC

Re: squared

#3

Re: squared

John McGaw

Does any of this work for you?

3rd using the HTML sub tag

3rd using the HTML sup tag

3rd using the HTML small tag

Re: squared

#4

Re: squared

Bill Turpin in WNC mountains

What is the HTML tag?

Re: squared

#5

Re: squared *LINK*

John McGaw

Easier to tell than to write since the browser want to 'eat' the sequences but I'll give it a try. For example when I say a HTML sub tag it looks like this:

.....

Well, that didn't work right since the browser and WC software kept messing me up by interpreting the codes instead of showing them. How about this: a HTML sub tag would be a left bracket '<' followed by the characters 'sub' followed by the '>' right bracket. Those five characters would precede what you you want subscripted. After the subscripted text you would have '<' and '/sub' and '>' which turns off the subscript. What it comes out as is subscript.

The superscript is the same but the magic characters between the brackets is 'sup' and '/sup' and small would have 'small' and '/small'. Dang, that is hard to describe. Take a look at the link to see if it comes across better.

If you are feeling especially crazy then you can use HTML tags to do things like reverse text but it really freaks some people out and isn't digestible by every browser. It is even possible, with more work, to invert text but that is left as an exercise for the reader.


http://www.w3schools.com/tags/tag_sup.asp

Re: squared

#6

Re: squared

John McGaw

OK, I just can't resist. This isn't perfect by any means but it can be fun.

˙noʎ ɹoɟ ʇı op oʇ ɯoɔ˙ʇxǝʇuʍopǝpısdn˙ʍʍʍ ǝʇıs ǝɥʇ ǝsn uɐɔ noʎ ʇnq ʎsɐǝ ʇ,usı ˥W┴H ǝɥʇ ƃuıʇɐɹǝuǝפ ˙ʇxǝʇ uʍop ǝpısdn sı sıɥ┴

As you can see, the letter 'T' causes some problems.

Re: squared

#7

Re: squared

Robby Wright in San Marcos, CA

Moses - Another common way of showing what you are descibing is to use the up-carat:

4^2 would read as 4 to the second power or 4 squared.

Robby Wright

Re: squared

#8

Jim DeLaney, Austintown, Ohio

Re: squared

Jim DeLaney, Austintown, Ohio

Hold down the Alt key, and type in the numbers using the numeric keyboard: Alt + 0178 is ², and Alt + 0179 is ³.

Also Alt + 0188 is ¼,

Alt + 0189 is ½, and

Alt + 0190 is ¾

Re: squared

#9

Re: squared

Alan in Little Washington (NC)

If you want a higher or more complex exponent it is best to use the sup HTML code: left carat (<), the word "sup", right carat (>) followed by the text then left carat, fwd slash, "sup", right carat to close out the HTML.

YA X YB = Y(A + B)

Y2 X Y3 = Y5

Re: squared

#10

Moses Yoder

Re: squared

Moses Yoder

105

Yep, thank you, the sup tag works great. How do you know when to use the < bracket or the [ bracket?

Re: squared

#11

Re: squared

John McGaw

As far as I know the brackets for HTML tags are always "<" and ">". There may be special circumstances or software where the "[" or "]" characters have some special meaning but I'm not familiar with them as regards to ordinary HTML composition.

Re: squared

#12

Jason Roehl in Lafayette, IN

Brackets.

Jason Roehl in Lafayette, IN

The '[' and ']' brackets are often used to insert HTML tags into text in certain bulletin board software packages, such as vBulletin, if allowed by the administrators.

Jason