We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
Does anyone know where I might find some 16/4 #1 common white oak - air dried or kiln dried. Preference would be in VT, NH, MA, CT, eastern NY. I've been looking for it for weeks now Don't really want to go the "reclaimed" route because I fear the price would be higher than what I want to pay.
Clic on the home page to the left of your screen, then clic on Woodfinder on the upper right side. Fill in the requested information and see what you get.
That might be a really tough find. 8/4 white oak can be quite difficult to kiln dry, 16/4 would be exponentially more difficult. It may have to be done in a vacuum kiln since that would take so long with pretty high degrade in a conventional kiln. Good luck. No ideas here in Central IL.
Finding 16/4 anything is going to be tough, and if you do, they'll want 4 prices for it. I recently did a table that needed 4x4 leg stock; cost me $16 a bf for #1 common (glued up stock would not work).
Next weekend I'm milling a whole walnut to 4x4's so I'll have the stock available for the future.
Your best bet is to look for old re-claimed timbers. Nobody saws and dries that thickness in W Oak these days.
However, about 9 years ago, I got a big urban tree, which was twisted. Since it is easy to find thinner Oak here, I thought I would try this in thicker dimensions, since the slope was close to 1 / 8, I reasoned that this might allow the core to dry faster than normal, where the only end-grain, was the end of the beam. It dried great, with very little checking. However that much grain runout did limit how it could be used, but since I was not doing it to sell, I managed to find plenty of uses that didn't leave me worrying about it.
Also, just as a side note. I know we've all read to only use straight grain for steam bending. WELL, I had a custom bending project at about the time when this wood was right for steaming, and since I already had the steamer going, I ran a few extra parts using this wood, with that much even runout, and it worked great. Of course, I was using end compression, and the runout was even from end to end, rather than like around a branch where all the rest is straight, and then abrupt change.
Sue, Sorry about hijacking your thread. If there are any other woods that you might could substitute with, why don't your post that.
Could you build it up in a box construction around a solid core. Using 4/4 stock and mitered corner joints it will look like solid. Just a thought-I've never done it.
I had the same thought Don but so far I'm being told that it has to be solid. These legs are going to be used for outside cabinets so the fewer glue joints the better.
Even the Stickleys, who specialized in White Oak, made their thick legs from 4-4/4 pieces. If you can access Bob Lang's "More Shop Drawings for Craftsman Furniture", he shows at least 5 ways it was done.
Got it. We had a lot of 16/4 WO when we built the Onrust ( www.theonrust.com )but it was all sawn onsite and used wet. How much checking and splitting can you tolerate in this project? It WILL check and split but is still plenty strong.
Oh, that is a good answer. Forget trying to find lumber and look for turning squares suppliers. Might try Adams Manufacturing in Morristown TN and if they don't have this stock they may be able to recommend someone. I have bought various 4" squares from them but never asked for oak.
You guys are great at thinking outside the box! Last week I thought I'd found some air dried from a guy in CT who makes naval timbers. But his "air dried" wood measures 28%...I'm looking for more like 12%. And, there's no time to kiln dry.
I emailed Matt Burak (tablelegs.com) over the weekend because I thought of the same thing re: turning squares. Matt's famous for using solid wood in all of the legs he sells. But he too has to do glue-ups for his white oak turning squares on anything over 3"...he can only buy 12/4 white oak max.
I even put an ad on Craigslist over the weekend thinking someone might have some stashed in their barn...haven't heard from anyone yet.