Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Outdoor Flower Box/Water feature?

Posts

Outdoor Flower Box/Water feature?

#1

Outdoor Flower Box/Water feature?

tom

I am considering doing some upgrades to our deck. I would like to make a built in planter box for flowers and A small water feature fountain with a little pump. I have the woodworking worked out but I need some suggestions for "liners". For the flower box I was thinking of bending up aluminum coil stock for the liner and installing some drain holes in the bottom. But not sure about the water feature?

Thanks!

Re: Outdoor Flower Box/Water feature?

#2

Re: Outdoor Flower Box/Water feature?

Wade

They do make some nice heavy plastic liners now. Check a large garden center. Here is one listing, a bit high in cost at this vendor, but gives you an idea of what is available: http://www.hooksandlattice.com/plastic-liners.html

Wade

Re: Outdoor Flower Box/Water feature?

#3

Re: Outdoor Flower Box/Water feature?

Chuck Jurvelin

What I have found that works great for flower boxes are the plastic totes that you can buy almost

anywhere. I have designed boxes that incorporate two plastic totes end to end with support

built into the bottom of the wooden structure. This makes it easy to remove and replant the flower box

without breaking your back to lift it! It also allows you to take the boxes inside in the off-season and get a

headstart on the planting. I made some preliminary drawings of what I wanted, and then

toured the local WalMart and found the appropriate size containers and modified my dimensions to fit.

Re: Outdoor Flower Box/Water feature?

#4

Re: Outdoor Flower Box/Water feature?

paul in AZ

A flexible plastic liner would give you the greatest leeway for size/shape.

I have a pond -at 8000 gallons a bit bigger than you're looking for- and would suggest some of the liner material used to build ponds. These are very heavy reinforced sheet plastic. They are either 20 or 45 mil.

If there is a pond construction company in your area you could probably pick up a few square feet as remnants for free or cheap.

I suppose if all else fails you could buy one of those little kiddie pools and cut the bottom out to use as your liner.