Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Wooden baseboard radiator covers

Posts

Wooden baseboard radiator covers

#1

Wooden baseboard radiator covers

NickinMass

Anyone out there in WCland ever made wooden covers for baseboard radiators? I'm retrimming our dining room, the last room of the great multi-year house retrimming project (all new doors, jambs, baseboard, crown and shopmade casings), and I'm currently working on the wainscotting (already got the built-in corner cabinet done). The metal baseboard covers would both look cheesy next to, and be effectively locked in place by the wainscotting, so I'm looking to built something. I'm assuming I'd be better off using ply, but anyone have any pointers for me?

Re: Wooden baseboard radiator covers

#2

Holmes . . .

steve mackay

Saw Mike Holmes' carpenter do them on his show once. Not sure if you can access his episodes on this Devil Machine though. They were pretty neat and could flip up to clean.

Re: Wooden baseboard radiator covers

#3

Re: Holmes . . .

NickinMass

I definitely want access to the radiator, so I was thinking of using a combination of a mechanical support (lip sitting on a rabbet sort of thing) plus some rare earth magnets to hold the front of the cover in place.

I did some more web searching and found a few thread on other sites, but I'm not seeing any big do's/don'ts, so I think I'll just forge when I get time to tackle that part of the project.

Re: Wooden baseboard radiator covers

#4

Re: Holmes . . .

steve mackay

Yea, I remember it was kind of a "one-off" and the guy was kinda wing'n it. It had the look of louvers (sp). The "rad" was water but I remember the guy mentioning he had kept the switch to 'lectric in mind.

Re: Wooden baseboard radiator covers

#6

Re: Wooden baseboard radiator covers

Lee Schierer McKean, PA

Just be aware that radiators work on convection air flow, which is not very strong and can be completely stopped if the circulation holes are too small. Typically anything smaller than that will nearly stop all air flow and you will revert to radiation transfer only once the enclosure is heated. The larger the openings the better it will function; however, nearly any enclosure is going to reduce the effectiveness of the radiator.

Lee