Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Cutter for Craftsman planer

Posts

Cutter for Craftsman planer

#1

Cutter for Craftsman planer

Jerry Nicholson

I have a really nice Craftsman 315.25020 planer that needs a new cutter. Sears, of course, does not stock this any longer. Does anyone know another source for this 2 inch cutter?

Actually, I have solved the immediate problem. I have a 4 x 4 fence post that is in good condition but leans a bit and I wanted to taper it rather than pulling and resetting it. I think the post is SYP. I had planned to use the planer mentioned above but that didn't work out. However, my Stanley #40 scrub plane did the job just fine and I worked up a nice sweat (to say nothing of the blister I just noticed)!

Jerry

Re: Cutter for Craftsman planer

#2

Re: Cutter for Craftsman planer

Jason Waters

The 315 prefix in the number indicates it's Ryobi made (if it's super old, it might be Diehl, but I'm thinking a hand power plane is Ryobi).

Maybe if you can identify it's Ryobi sibling, you could start there? Obviously, I'd take the blades you have with you to wherever sells the Ryobi blades (probably Home Depot only these days....) Some hand power plane blades interchange between brands.

Jason

Re: Cutter for Craftsman planer

#3

Re: Cutter for Craftsman planer

Jason Waters

I just went to the Sears site.

It looks like it's old, probably a Diehl made tool. (and probably better than a Ryobi made planer)

Has it got a spiral cutter??? Looks like it.

Then it's like my beloved Porter Cable 126's. I have several of them. I find it cheaper to buy used ones, replace the bearings, sharpen the HSS cutters, and use them than to buy a new cutter. Yes, things are that bad out there.

Do you have the sharpening attachment? I have it for my 126, and my Guild 1101/2/3 router/plane combo kit. If you don't have one, I'd be willing to try to sharpen it if the cutter shaft is the right diameter to mount on the porter cable sharpener and I can get it to work. Any good tool sharpener should be able to sharpen it as well. The sharpener's with the planes are only good for HSS, if you have carbide, then you have to take it somewhere.

You should be able to get it sharpened, and it will be like new.

Jason