Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

I guess new shopshots are in order. PT1

Posts

I guess new shopshots are in order. PT1

#1

I guess new shopshots are in order. PT1

Sophie

When Becky and I were looking for property here in Gold Beach OR the requirments were that I needed a shop and she wanted a view. Well we almost got what we wanted the only problem was that we didn't like the house so whats a guy to do? Exactly, we had the house removed and built a new one! So you've already seen the new house and the view so here is the shop.

The shop is 28' by 60' with 11 foot ceilings and includes a half bath. There are two rooms in the shop, one is 28x40 which is the automotive side for the truck, boat, and VW. My woodworking area is 20x28 which is bigger than my old shop. Both areas have independent forced air heat. But with the amount of time that I spend in the woodworking area and our location I added a wood stove to offset the propane bill. So here is my little cave.




Re: I guess new shopshots are in order. PT1

#2

I guess new shopshots are in order. PT2

Sophie




Well for what it's worth I guess thats it, thanks for viewing.

Sophie

Re: I guess new shopshots are in order. PT1

#3

Re: I guess new shopshots are in order. PT1

Yonak

Sophie, nice shop. I especially like the 11-foot ceilings. They'll make things much easier, with long boards and tall stacks. The wood heater will help in heating all that vertical space. The big overhead doors are a nice feature, too, for both ventilation and access.

I must have missed the pics of the house. Can you point me to where they are ?

Re: I guess new shopshots are in order. PT1

#4

Re: I guess new shopshots are in order. PT1

Sophie

I'm sorry I'd give you the link but I've forgotten how but I'll work on it and get it figured out again. Anyway the post for the house was posted a couple of weeks ago on 5/21 under the heading "Test*PIC*"

Sophie

Re: I guess new shopshots are in order. PT1

#5

Got it, thanks


Re: I guess new shopshots are in order. PT1

#6

thanks for the "tour".

Bill Tindall

Lucky neighbors to have a shop like that near by........

Re: I guess new shopshots are in order. PT1

#7

Re: I guess new shopshots are in order. PT1

George Colonel's Workshop-Havertown PA

Good Evening Sophie,

That's a beautiful shop. Enjoy it. I bet it feels great to be working there, with all that space. I am drooling.

George

Re: I guess new shopshots are in order. PT1

#8

Re: I guess new shopshots are in order. PT2

Brian in SLO

Now that's my kinda shop! Woodworking tools all around and a glider hanging from the wall!

I hope the glider gets as much air time as the tools get makin' sawdust!

Brian

Re: I guess new shopshots are in order. PT1

#9

Re: I guess new shopshots are in order. PT1

Gerry In North Surrey

Looking good, Sophie. Like The Colonel says, I envy you your new shop. Enjoy.

Gerry, who's still shopless in Surrey.

Re: I guess new shopshots are in order. PT1

#10

Ellis Walentine

A shop shot for sure

Ellis Walentine

Great looking shop, Sophie. You've really landed on your feet there. Now we'll have to see what you decide to make in that great new shop.

Thanks for posting all these great pix.

Ellis

Re: I guess new shopshots are in order. PT1

#11

Re: I guess new shopshots are in order. PT1

Jason Waters

Nice shop! I'm envious as well. I love your workbench, and it's fairly clean, unlike mine......Matter of fact, the whole shop is neat and clean.

Jason

Re: I guess new shopshots are in order. PT1

#12

Great Shop!


Re: I guess new shopshots are in order. PT1

#13

scissor lift

McKay

Like your shop. I notice the scissor lift in the one shop. Could you give more information on that? That would really be handy for the planer outfeed.

Re: I guess new shopshots are in order. PT1

#14

Re: scissor lift

Joseph Mulherin, Sr.

McKay, Carol had a sissor lift she made and showed us aq few months ago. If you go back thru the archives of messages you might be able to find the picture and description.

Re: I guess new shopshots are in order. PT1

#15

Re: scissor lift

Joseph Mulherin, Sr.

You can contact Carol at her address: www.carolj.reed @gmail.com

Re: I guess new shopshots are in order. PT1

#16

Re: scissor lift - wrong email

Carol

Email is carol.j.reed@gmail.com. Do not use the "www".

With regard to a scissors lift, what I made was not a scissors lift table that could be used as an outfeed. I have a Harbor Freight scissors lift with a bench top on it that I could use that way. What I made was much smaller in surface size but also with a much taller lift. It's purpose was to lift upper shelf units to the height of lower shelf units because I can't do that any more. It serves that purpose very well.

If anyone wants some insight of what I learned about making that lift, as in what I would do differently if I did it again, I would be happy to share.

Re: I guess new shopshots are in order. PT1

#17

Re: scissor lift

Jim Toews

Joseph,

I have a Jet scissor lift (different color than Sophie's): I love it! I find it much easier to get a carcass, for example, onto the lift and let the hydraulics lift it up to the level of my assembly table or workbench. It is also great for lifting heavy stock to table heights. So much easier on my aging back. It wasn't cheap, but it was a whole lot less than a visit to the ER for back strain. I find I'm always using it in situations I hadn't imagined when I bought it. Definitely a tool I would not have put on my "must have" list until I got one: now I wouldn't want to work without it. You do need to do your homework though, as they come in a wide range of height ranges (both how low they go as well as how high) and weight limits (I've seen 300 lbs at the low end and literally tons at the high end - prices vary accordingly).

Jim

Re: I guess new shopshots are in order. PT1

#18

Re: I guess new shopshots are in order. PT1

Dominic in Buck's County PA

Hey Sophie!

I was going to say "How're ya' doing!?" but it looks like you are doing just fine! It's great to see you posting here again. Just like old times eh?

See ya around,

Dominic

Re: I guess new shopshots are in order. PT1

#19

Jim in Burlington Ont.

Re: I guess new shopshots are in order. PT1

Jim in River Oaks, Ont.

Sweet looking place Sophie, but Man you need some windows!!!

Take care,

Jim

Re: I guess new shopshots are in order. PT1

#20

Re: scissor lift

Sophie

Now don't quote me on this but a number of years ago I believe it was Tommy who posted a pic of his which got me to thinking how usefull it could be having one in the shop. On one of our trips we had a chance to stop by a Harbor Freight store and as we were walking up and down the isles we passed the lifts so I snatched one up. I think I paid less that $200.00 for it and it's good for something like 1000lbs. It matches the table hight of every machine in my shop except for the 2 bandsaws so for those I just made a platform that I put on the lift. It's really amazing how much I use that lift. Just a couple of weeks ago I used it to take out the trans and transfer case out of my truck to replace the clutch. Or if you need to lift heavy things into the back of your truck such as large burls the lift is really handy to have. :-)

Sophie

Re: I guess new shopshots are in order. PT1

#21

Re: I guess new shopshots are in order. PT1

Sophie

Hi Dom.

Becky and I have really missed all of our friends that we have made here at WC. Even the ones that invite you to dinner then burn the chicken and blow soda pop all over the kitchen floor! ;-)

Sophie

Re: I guess new shopshots are in order. PT1

#22

Re: I guess new shopshots are in order. PT1

Sophie

Hi Jim,

When we bought this place the wood shop didn't have any windows at all. But with the help of old time WC members Ray and Judy Johnson Ray and I finally did put a small window in the shop. In fact Ray and Judy have made a number of trips down here and even helped put the siding on the house. Like always our door is always open to WC folks!

Sophie

Re: I guess new shopshots are in order. PT1

#23

Jim DeLaney, Austintown, Ohio

Re: scissor lift

Jim DeLaney, Austintown, Ohio

I have the HF 1000# model, like yours, Sophie. I put an MDF top, banded in ? wood, on it and I frequently use it as a work table, assembly table, or finishing table. Being able to move heavier workpieces up or down to a comfortable height is one of its nicer qualities.

It also makes moving heavy objects into ot out of the truck bed much easier.

The only (minor) drawback I've found is that over time - like overnight, maybe - the hydraulics leak down and I have to pump the table back up. When working at the table for a couple hours, though, I've never noticed any significant drop in its height.

BTW, when I bought mine, HF had them on sale for $199.00, and I used a 20% off coupon, and got it for $160.00. Well worth it, IMO, for the convenience and the grunt work it saves.

Re: I guess new shopshots are in order. PT1

#24

Re: scissor lift

Carol

Yours has that sinking feeling, too, huh, Jim? Mine too. I use a stick in the bottom to 'brake' the table height. Holds until I need to move it.