Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Maintaining Traditional Oil Skins and Tin Cloth

Posts

Maintaining Traditional Oil Skins and Tin Cloth

#1

Maintaining Traditional Oil Skins and Tin Cloth

ydnarwhidbey

I just read the article by by Bob Smalser on maintaining oilskin coats. http://www.woodcentral.com/cgi-bin/readarticle.pl?dir=smalser&file=articles_368.shtml I am about to try this technique and have a couple of questions for anybody that can help. The article says to add a little turpentine to the linseed oil. About how much is a "little". Any idea how many coats this gallon will recoat? How long will the mix keep if sealed in the can. And last..................since there is so much linseed oil in the mix, will the finished coat be sticky? Thanks for any help.

Randy

Re: Maintaining Traditional Oil Skins and Tin Cloth

#2

Re: Maintaining Traditional Oil Skins and Tin Clot

Bill Tindall

I suspect that such a treatment will leave you smelling like a "traditional" wearer of such garments. Turpentine is not very volatile and its smell will linger. The linseed oil will oxidize and split out nasty smelling aldehydes and acids which, with luck, the turpentine smell will mitigate.

These garments aren't cheap and winding up with something that stinks so bad you can't wear it except while hunting elk in remote mountains will be sad.

Better to consult the experts in these matters- Filson. In any case don't put a $200 garment at risk until you see (actually smell) the treatment done on someone else's coat.

Personally, I use the can of stuff from Filson for treatment.