Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Drawer friction reducer.

Posts

Drawer friction reducer.

#1

Drawer friction reducer.

Gary Smyth

Old wood cabinet with wood drawers on wood runners. Runners are barely grooved. What do you use to ease friction? Will be located in a enclosed, unheated garage. I want something that doesn't freeze in winter and melt in summer and doesn't get sticky if not used often. In the past I've used soap, silicon, beeswax, "slip-it". It's not that I don't have options but is there something better that better fits the task?

Re: Drawer friction reducer.

#2

Re: Drawer friction reducer. *LINK*

Larry Barrett

I have used used thin strips of UHMW Polyethylene. Works well if drawer sides have worn a groove in the runners. This may not be the case for you.

Here's a link to one source.


UHMW Polyethylene

Re: Drawer friction reducer.

#3

Re: Drawer friction reducer.

Bill Tindall

I don't use hardware for my furniture drawers. I do shellac the insides of the cabinet, and the drawers. Then I wax the drawer sides and runners. I use a home made Carnuba in xylene wax because the Carnuba is very hard, but any paste wax will be effective.

If your drawers are well fit they will close effortlessly.

Re: Drawer friction reducer.

#4

Re: Drawer friction reducer.

Hank Knight

Gary,

I just fininshed building new drawers for an old drill press stand. The drawers carry a lot of weight, so I attached 1/4" strips of UHMW to the bottoms of the drawer sides before I cut the joinery for the drawers. The UHMW rides on the drawer blades and the drawers slide like they are greased. I think the UHMW will produce less wear on the blades over time than wood-on-wood. In your case, you could probably inlay some UHMW in the drawer blades for the drawer sides to ride on and accomplish the same thing.

My $.02.

Hank

Re: Drawer friction reducer.

#5

Re: Drawer friction reducer.

Craig in Silverdale

I use this a lot of the time.

http://www.google.com/products/catalog?q=slipit+lubricant&hl=en&prmd=imvns&bav=on.2,or.r_gc.r_pw.r_qf.,cf.osb&biw=1208&bih=953&um=1&ie=UTF-8&tbm=shop&cid=6379252114794076723&sa=X&ei=u0DFT6ycBcjs2gWmqpXfAQ&ved=0CH8Q8wIwAg