Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Question about Chestnut

Posts

Question about Chestnut

#1

Dan Jechura

Question about Chestnut

Dan Jechura

Does anyone know if Chestnut is a good wood to use out doors. It will be on a outside door with no storm door. Also what would be a good finish for this wood.

Thank you for your time.

Dan J.

Re: Question about Chestnut

#2

Re: Question about Chestnut

Mark Mandell - Gone Round In New Jersey

It will do nicely outside if coated. Coating of choice in this application is minimum 2, better 3, coats of a good spar varnish.

Re: Question about Chestnut

#3

Re: Question about Chestnut

TomD

It holds up as well as most. I have some pieces unfinished on my deck as a sort of railing. It weathers, but has not fallen apart in 15 years. Better than oak. I seem to recall reading that enormous amounts were used in barn boards or rail ties, in Penn.

Re: Question about Chestnut

#4

Re: Question about Chestnut

David Yoho

I think it is as good as anything else you could use outdoors. I've seen it where it was so hard you had to pre-drill it before nailing. The best finish would be paint but, short of that, I'd go with a spar urethane varnish.

Re: Question about Chestnut

#5

Re: Question about Chestnut

Bill Tindall

It made good fence posts in its day and was used extensively for barn/house siding. But.....Given the rareness of this essentially extinct species I only use it in applications were I expect it to last centuries, not decades.

Re: Question about Chestnut

#6

Finish use Sikkens Cetol *LINK*

Dave Paine

I have a sidelight on the left of the front door which I made from a mahogany species (I do not know the exact species). This does not have any storm door.

I finished with with Sikkens, made by Ciba Geigy. A two part process. Apply the first part, wait a year then apply the second part.

This had held up better than any spar varnish I have used. This is not cheap, but this product will hold up longer than a spar varnish.

The final coat is good for a few years. I just applied a second coat before this last winter. A light hand sanding to rough the surface and then apply with a brush.

The link is for the products sold by the Borg. Paint shops will carry more options.


http://www.sikkens.us/en/Products/HomeDepot/Pages/default.aspx

Re: Question about Chestnut

#7

Dan Jechura

Re: Question about Chestnut

Dan Jechura

thank you all for your help.

Dan j.