Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Thoughts about "Repairing" mouse nibbles?

Posts

Thoughts about "Repairing" mouse nibbles?

#1

JL

Thoughts about "Repairing" mouse nibbles?

JL

I've been asked by a parishioner to clean up this mouse chewed chair.

As you can see, there is minimal damage. I was figuring on evening out the nibbles with a spoke shave and probably putting a slight bevel across the top of the top rail. I was then going to even out the mouse nibbles on the back stiles. I was then going to clean it up and refinish it.

Any thoughts, comments? The chair isn't much, but the seat was hand embroidered by her mother.

Re: Thoughts about "Repairing" mouse nibbles?

#2

Re: I no expert on mice or repair

Henry W (Raleigh NC)

I no expert on mice or repair - but i agree with your approach. If this is not one of a set, then you have even more license I would think.

Henry

Re: Thoughts about "Repairing" mouse nibbles?

#3

Kneale Brownson

I like the bevel idea.

Kneale Brownson

Were you going to sand out the other spots?

Re: Thoughts about "Repairing" mouse nibbles?

#4

Re: Thoughts about "Repairing" mouse nibbles?

John Lucas

Exactly what I would do. Just blend in the damage to the rest of the chair.

Re: Thoughts about "Repairing" mouse nibbles?

#5

Re: I no expert on mice or repair

Philip Duffy

If you can paint the chair, I would suggest using Bondo to fill the damaged area. Never fails and the mice will not eat it again! Philip