Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Anyone ever make a wooden comb?

Posts

Anyone ever make a wooden comb?

#1

Alan Young

Anyone ever make a wooden comb?

Alan Young

Invited to a young lady's HS Grad party in a few weeks. Was thinking of making a handheld mirror and was thinking what would be involved in a comb. The teeth would need to be long-grained I suspect..Any thoughts?

-Alan

Re: Anyone ever make a wooden comb?

#2

Re: Anyone ever make a wooden comb?

Barry Irby

I'm thinking this would require a dense tight grained exotic like cocobolo, or rose wood. (Cough, cough, where did I leave my cortisone?) The teeth would have to be long grain and the spine would have to be fairly wide because it would be short grain. Would need to be beautifully sanded and polished or it would rip 'em out by the roots.

Re: Anyone ever make a wooden comb?

#3

I take it you're considering a wood

Gary Smyth

combing comb, not a barrette or high style mantilla comb. Before you start you might want to check out "hand cut combs", or "hand made combs" on any browser. The best combs I know are from the Alps in Austria or Switzerland and the brand is Speer or Speered--something like that. Some years ago my former other used to swear by them and they were priced only $10-$12. Other wood combs from Japan were double that price, and hardly worth the effort given the work to value ratio. If you check "etsy" the craft internet site I believe I saw wood combs there priced at $6. (These are all hair combing combs.) Before you jump into making one and getting all the equipment you will require, see what's out there. It's a great idea for a gift, but will a teen girl be able to appreciate it?

Re: Anyone ever make a wooden comb?

#4

Re: I take it you're considering a wood 

Bill Turpin in WNC mountains

Many years ago, before turning took over my life, I made many combs. All were domestic hardwoods mostly cherry. Cut out on bandsaw, sanded between the teeth with a 1" x 42" belt sander that had about four inches of un-backed belt. Sold @ $20 at craft shows. Required a lot of hand sanding, teeth had to be perfect smooth or would catch hair. 1/2 inch thick body, teeth tapered to about 3/32". Cherry with a cathedral eye was favorite.

Re: Anyone ever make a wooden comb?

#5

Alan Young

As always-a very helpful collection of information

Alan Young

Thanks all- Not sure what I'll be doing but you've given me some very helpful information-Thanks1

Re: Anyone ever make a wooden comb?

#6

I brought one home from Germany

DizD

from the Ligna, Hannover show in late 90's. They had exhibit with various artisans, including a comb maker. As I recall he had a saw with a thin blade and basically a box joint type setup - cut, move, cut. The one I have is beech.