Visited George Nakashima's studio
Dave Paine
Not really an accomplishment, but you did ask what we did over the weekend.
Saturday I went with another woodworking friend to visit George Nakashima's studio near New Hope, PA.
Gorgeous spring day for a rural drive. Mid 70's and low humidity.
I live north of Allentown, PA, so a relatively short drive.
The studio is open for "self directed" tours on Saturday 1 pm - 4:30 pm. GPS really helps, since only a tiny sign to mark the location. Address stated as 1847 Aquetong Road, but as you drive down the road, you will not see this number on the mailboxes.
The main studio is a concrete roof arched design. This houses some original works, dating back decades.
George's son was in the main studio and is eager to talk to the visitors. He recognised out British accents and spent a lot of time talking about old British cars.
We asked where George bought much of the wood. There were large pieces in the main studio of what looked like walnut, but was English Walnut. The son mentioned George purchased entire trees, and he and his mother flew to the UK in the 60's to get the trees and mentioned standing on the deck of the ship going down the Thames.
Other pieces in the main studio were English Oak, with some wonderful burl.
Downstairs in the main studio is the "inventory". Many dozen seat blanks, already sculpted, many tree slabs for future projects.
The Chair dept is open to visitors. We were able to see a chair in progress.
Many of the power tools were 50's vintage.
The only Japanese tools we noticed were some pull saws.
The Finishing room was also open to visitors. They had just completed the finish on a 17ft long dining table for some Texas person. About 6-7 ft wide, made from two sequential slabs of walnut. About 8 bowties joining the two pieces. We were impressed with the size and asked how they were going to get this out of the room. Apparently they had not yet decided on how to solve this step.
We did notice a trick when clamping natural edge pieces. Some scraps are cut to match the natural edge profile. Makes sense once you see, but not obvious if you have not needed to clamp a natural edge.
If you are in the area, it is a worthwhile visit. Nice location, friendly people and some wonderful pieces.