Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Winsor chair broken spindle

Posts

Winsor chair broken spindle

#1

Winsor chair broken spindle

Dave in Bryn Mawr

To those of you who responded to my May 5 plea for help, here is a follow up. I said I had done this repair by increasing the length of the spindle with a scarf joint. Well, I lied. Before proceeding with that route, I removed the spindle and noticed that the seat end tenon was 1" long and realized that if I put it back to a depth of 3/4", I would raise the spindle by 1/4" (duh!), enough to engage the tip of the spindle in the top bow hole. Though the bottom tenon was now exposed a little stain took care of that. Boy, did I save a lot of time!