Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

OT - String Trimmer Carb Adjust

Posts

OT - String Trimmer Carb Adjust

#1

OT - String Trimmer Carb Adjust

Ralph Lipeles

My Weed Eater XT 50 string trimmer has both high and a low carburetor mixture adjust screws. Does anyone know what the initial needle adjustments should be so that I am in the ball park when I try to get it started?

Thanks in advance.

Ralph

Re: OT - String Trimmer Carb Adjust

#2

Re: OT - String Trimmer Carb Adjust

RobCarr

Honestly, don't mess with them - if it's not running right take it to a shop that repairs them. Every time I have ever mess with carburetor's idle/speed/mixture adjustments it was usually worst then before I started... and that's with the service manual in hand to guide me! ;)

Re: OT - String Trimmer Carb Adjust

#3

Moses Yoder

Re: OT - String Trimmer Carb Adjust

Moses Yoder

I don't know about that particualr carb, but they are usually out about 2 turns. Turn them all the way in, out 2 full turns, it should run and you can adjust them from there.

Re: OT - String Trimmer Carb Adjust

#4

Re: About the same I always used 2 1/2 turns.


Re: OT - String Trimmer Carb Adjust

#5

Re: OT - String Trimmer Carb Adjust

Jason Waters

If you are having weed eater problems (or any 2-cycle engine really), the first thing to do is dump the gas out (in jar for properly disposal) and refill with fresh, mixed gas, preferably ethanol-free.

That solves hard starting on mine about 90 percent of the time.