Another misguided criticism of Krenov dowels
Bill Tindall
Robert Troup's letter to the editor, Popular Woodworking June 2012, is yet another example of people critical of Krenov's use of dowels in cabinet construction which results from the fact that the purpose of the dowels is not widely understood.
I took a class in Krenov cabinet construction taught by one of Krenov's students, David Finck, where I learned the purpose of the dowels. When building a cabinet with a complex door, for example a bow or faceted door, the door is constructed first and the case built to precisely fit the door. This fitting involves multiple assembling and disassembling of the dry fit case. Only a few of the dowels are installed during these dry fits. When all is well, the worn dowels from test fitting are replaced by fresh dowels throughout and the case glued. Repeated assembly and disassembly of the case during door fitting would permanently damage either mortise and tenon or dovetail joinery. (been there and done that before learning the better Krenov way)
The plyed panel on the back of these small cabinets is precision fit to a rabbit in the case back and glued in place. The strength of the cabinet is substantially enhanced by this back panel such that the dowels are not relied on entirely for case strength.
It was not until I built a true Krenov style cabinet that I came to realize that Krenov was a skilled engineer who devised clever ways to assemble his novel cabinets.



