Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

stable/cow mats

Posts

stable/cow mats

#1

stable/cow mats

Grant Wilkinson

I'm considering putting cow mats down on my cement-floored basement shop. Has anyone had any experience with them? All my tools need to roll from against the wall to where I can use them. It looks like they will roll over this stuff fine, but I'm wondering if they will leave deep dents in the places where they will be sitting for longer periods of time.

Re: stable/cow mats

#2

No, but you might ask at a feed store

Bill Houghton, Sebastopol, CA

Cows and horses have a ratio of weight to contact patch (their hooves) that's similar to the ratio of weight to contact patch (casters) on machinery. I would think a feed store, or one of their customers, could tell you how much the mats sink under the weight of an animal's foot. They may even have machinery they roll around in the stable.

Re: stable/cow mats

#3

JL

Re: stable/cow mats

JL

I had "stall mats" in my horse trailer. They worked fine for the horse trailer. I suppose they could be used to support equipment, but why?? I find it easier to have reasonably "hard" floor mats on my concrete shop floors. They are in front of my various tools (lathe, table saw, work bench) where I do a lot of standing. I like something with a bit more "give" than the stall mats.

Woodworking generates sawdust and chips. Why have something with seams or cracks for sawdust to accumulate? I can move my mats and vacuum (on the rare cases where I use a vacuum :b ).

Re: stable/cow mats

#4

Re: No, but you might ask at a feed store

Grant Wilkinson

Tks, Bill. I have already spoken to people at the store that sells the mats. They have no experience with machinery. As for cows - they move. They don't stand in one place for weeks at a time. Some of my machinery does. It's not the rolling over the floor that concerns me. It appears that the mats will handle that well. It's what will happen if/when a jointer or table saw sits in one place for quite a while. If it leaves a deep dent, sooner or later, the floor will be a mess.

Re: stable/cow mats

#5

Re: stable/cow mats

Grant Wilkinson

Tks, JL. I've looked at using anti-stress mats. The problem for me is that my tools do not stay in one place. My shop is small. Everything is on wheels. When I need them, I move them out. When I'm not using them, they are against the wall. I could move a mat to the machine, once I've moved the machine to where I want to use it. I just figured that, if I could do the whole floor, then I don't need to be hauling mats around.

I take what you said about sawdust in the cracks. Tks.

I looked at commercial grade rubber flooring, both in rolls or in interlocking tiles. It's nice stuff, but very pricey.

Re: stable/cow mats

#6

JL

Re: stable/cow mats *LINK*

JL

Your biggest problem is going to be a "high coefficient of friction". Your casters and rollers will not roll/glide on the stall mats very efficiently.

If you are willing to put up with that, I would suggest looking into replacement horse trailer mats - specifically ramp mats.


Horse trailer accessories.

Re: stable/cow mats

#7

A different idea

John in NM

Get a good pair of boots or shoes with a soft crepe or wedge sole. The sole wears quick but just stay on top of re-soling. That and some nice arch supports and you probably won't notice the floor material at all.

Why have mats and such when you can keep the cushioning only where needed, under your feet? :D

I have one mat that I should toss out, darn thing is always in the way. The casters on my machines are too small to roll over much of an obstruction.

Re: stable/cow mats

#8

Re: A different idea

Grant Wilkinson

Thanks to you both. Good food for thought. I've been following the other thread on this board about the chap who is going with masonite +solid foam + snap lock flooring.

Decisions, decisions.

Re: stable/cow mats

#9

another option *LINK*

mdclor

Worth a look.....


garage floor tiles

Re: stable/cow mats

#10

Re: another option

Grant Wilkinson

Tks for the tile link. I've seen a few tiles like those. It makes for a pretty pricey floor covering. It may be the way I'll need to go to be satisfied, though.

Re: stable/cow mats

#11

Re: stable/cow mats

paul woolson

I've got wall-to-wall horse stall mats in my shop. I'd do it again in a New York minute. In fact, when I built a small addition, I had the floor down before it was completed.

I see absolutely NO negative to them. Machines roll just fine. I've got a 900 lb wide belt sander that isn't leaving any dents at all.

They are a complete pain in the neck to install because they are so darn heavy and hard to manipulate. But if you get a buddy (might have to be a pretty good buddy) to help you it should be fine. I did mine alone but likely wouldn't be comfortable doing that again.

The very best part is when you drop a chisel on them you don't have to take it back to the stones.

Re: stable/cow mats

#12

Re: stable/cow mats

Grant Wilkinson

Tks much, Paul. I was hoping that someone with real life experience with them would reply. I was going by a place that sells them anyway, so I stopped in to look at them. They had 4' x 6' x 3/4" and 5' x 7' x 1/2". I'm leaning toward the bigger one - fewer seams, and I'm thinking that 1/2" is plenty. My heaviest machine would be my Vega bowl lathe. I think that it's somewhere around 500 #. I'm just waiting for the 5 x 7 to go on sale. The guy told me that they would drop from $60 to $50. Since I need 10, I can wait and save $100, plus taxes.

Thanks again.

Grant

Re: stable/cow mats

#13

Re: stable/cow mats

Gary Camp, Bend Oregon

Do yourself a favor and get one of these. The EZ-Grip Mat Mover

glc

Re: stable/cow mats

#14

Just make sure they are not UN-stable/cow mats

Keith Newton

Those unstable mats are probably what leads to mad cow disease.

Re: stable/cow mats

#15

Re: Just make sure they are not UN-stable/cow mats

Grant Wilkinson

Keith: You'd get mad, too, if the floor kept shifting under you while you were trying to eat.