Long - OT Youngs' Machine Shop
Gary Smyth
Cruising country roads along the Monongahela River in Western PA I happened upon a sign for an open house called a “Hammer In”. Curious, I took a chance. Twenty five miles of winding two lane roads and three single lane 90 degree turn abandoned railroad underpasses later I got there. It was located in Rice’s Landing, PA on Water Street about 45 miles from Pittsburgh. (Rice’s landing area has an internet population of 436 and ethnic background reflecting the old mills consisting of Russian, German, Polish, Irish, Italian, Dutch, and English. The “town” itself has a population of 32 and has more vehicles than residents. Not a lot of money for signage, but it works). Anyway, sponsored by Pittsburgh Area Artist-Blacksmith Association the Young Foundry and Machine shop is open one day a year. This machine shop was abandoned in 1936, and was rediscovered only recently. The contents of the foundry and machine shop are intact with one huge Westinghouse motor for the metal lathe but leather belts are linked to it via reduction gears and overhead wood wheels for many of the other machines. The shop is as it was then with even the work orders on card stock hanging by the numerous machines. Apparently it was working one day and locked up “permanently” the next. The reason why, so far, lost to history. When it was operating it was set up to repair mostly stern wheel river tow boats carrying coal and coke to the steel mills down river. The river is directly across from the front of the shop, a 12 foot wide lane and fifty feet away, down a (now missing wood stairs) steep thirty foot high embankment. (In the 1930's before the Corps of Engineers built locks and dams, the river was very shallow and could be run only part of the year.) I’m told that the barge skippers used to ground themselves perpendicular to the river bank, dismantle, and hand carry huge crankshafts up the stairs across the lane, through the door (extreme right in photo) and on to the 22 foot bed metal lathe with a 30” chuck located along one wall. There were numerous forges and a complete casting area. The wood mold frames are stacked against another wall. The wood molds of handles, bushings, gears, artwork themselves, are scattered all over, up on pegs, hanging on walls, stacked on shelves, on the floor. The machines are huge and practically on top of one another with few or no safety features. One blacksmith told me the National Park Service is scheduled to restore the area as it is the best example of which they are aware of what a machine shop of that era did when parts were over built, strong, intended to be repaired, and local skilled people actually made stuff. I attempted to take pictures of the building avoiding other visitors when possible. There is one photo of a 10” column drill press. With a six foot geared arm and drill head that could rotate 360 degrees. So many tools! Too bad all the powder fine dust from the dirt floor will disappear if the Park service really does want to get involved. Check out the rope elevator too. I want one.
