Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Need help with Chest of drawers design

Posts

Need help with Chest of drawers design

#1

Need help with Chest of drawers design

Barry Irby

Are Shop Shots search-able? I was scanning through them looking for chests of drawers.

I want to build a chest for my nephew. Will be using walnut from the family farm. I have done some stock prep and reached the point I am befuddled for the technical parts of the design. In the past I built chests with frame and panel sides. this time I am considering solid wood sides.

If you use solid wood sides how do you allow for the movement of the wood? Anybody got pictures of details of the interior parts?

And how about drawer lip details?

Re: Need help with Chest of drawers design

#2

BarbS

I'd recommend *LINK*

BarbS

one of the best over-all books on this subject:

http://www.woodcentral.com/books/hylton_chests.shtml


Chests of Drawers by Bill Hylton

Re: Need help with Chest of drawers design

#3

previously posted

Bill Tindall

Under a title of How to build a chest of drawers I posted about 6 months ago detailed instruction for how I do it.

Re: Need help with Chest of drawers design

#4

Ellis Walentine

Searching Shop Shots

Ellis Walentine

Barry, there's a keyword search box on the Shop Shots index page, and another one on the WoodCentral Articles index page. They both search all the content pages of WoodCentral, so the results will include shop shots, articles, reviews -- whatever.

Ellis

Re: Need help with Chest of drawers design

#5

Re: previously posted

Barry Irby

Exactly what I was looking for. Can you explain about the internal frame? (I found the section on fitting the drawers) I am assuming the front and rear stretchers were glued in and the cross rail between the is not glued but allowed to float so the sides can expand and contract?

Re: Need help with Chest of drawers design

#6

A question for the Colonel.....

Barry Irby

Colonel, I saw a chest you made in a Shop Shot about the Cherry Suite. It was a chest with two banks of four drawers. Do you remember the dimensions? It appears to be about the size I need to build. Nice looking Piece.

By the way, I am sure you are personally familiar with everyone who was ever in the Air Force, probably on a first name basis. Is there any chance you knew a fellow named Richard Miles? He is also a retired Colonel. Father of a friend of mine.

Re: Need help with Chest of drawers design

#7

Re: A question for the Colonel.....

George Colonel's Workshop-Havertown PA



Good Afternoon Barry,

I would be happy to send you dimensions. I normally don't save my chicken scratch design scribbles, but will look to see if they are available. That is my favorite piece in the suite.

No, I didn't recognize the name of the Air Force Colonel you mentioned.

George

Re: Need help with Chest of drawers design

#8

Its Gotten Much Richer In Color And Tone Over Time


Re: Need help with Chest of drawers design

#10

Re: A question for the Colonel.....

Barry Irby

Thanks Colonel, looking forward tot he numbers. Just need width and height. Got any close ups of details?

Re: Need help with Chest of drawers design

#11

Sounds like you're discussing your best ale, Col.