Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Shaker Style Crown Mold?

Posts

Shaker Style Crown Mold?

#1

Shaker Style Crown Mold?

Thomas Norton

I am building a built in bookcase for a wedding present. My neice want Shaker style doors. Tha inot a problem. But I need an idea for a crown mold that would be more in the Shaker Style as opposed to a stock mold that is normal at the ceiling line.

Thanks!

Re: Shaker Style Crown Mold?

#2

There are lots of authors and drawings

Gary Smyth

Reiman, Sprigg, Shea, Handberg, Andrews, Horsham. The most often I've seen is a simple flat board with a convex silhouette that projects about an inch from the frame. There is also a plain flat board placed at a typical crown angle that meets the flat board that projects about 3/4" beyond the angled board. Handberg has a drawing of a concave moulding with a 1/4"(?) bead placed flat to the frame and that meets the flat board at the top. It projects about 1/2"(?) beyond that moulding. Perhaps others can supply photos. If not, the authors mentioned above will be a decent guide, and at least one or more can be found at moderate sized libraries.