Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

WC Weekend Accomplishments.......

Posts

WC Weekend Accomplishments.......

#1

WC Weekend Accomplishments.......

Dennis E Peacock

16 Apr 2012

Good Morning Everyone,

Understanding what today's date is, I can say that I'm glad my taxes are filed and have already been refunded and spent. I do have some friends that are the "last minute" type of folks and they seem to be in high stress mode around this time every year. Seems like people would get started sooner and eliminate the generated stress over this stuff. :)

The day job has kept me pretty busy as well as the LOML keeping me busy with the garden and the yard. Planting trees, flowers, and cleaning up the property from the winter months has taken its toll on my time. At times, I feel like we are a plant nursery. ;)

The boss at the day job has changed my working days from Tuesday through Friday to Monday through Friday, so I have one less day off per week now and I can already tell you that I don't like it but I will learn to get by with it. I do have a job and that is what counts for both me and my family. So I choose to be thankful.

Storms are gone now and my heart and prayers go out to all those who suffered in the severe weather this past weekend.

That's it for me, so what did YOU do this past weekend?

Best of weeks to you all.

Dennis Peacock

Re: WC Weekend Accomplishments.......

#2

Made whales & routing direction question

GolfSteve in Calgary

Made some inserts to accomodate the cutaway on my guitar project. Screwed up the glueup of the first stack (of 5), so had to make more. Made about 20 of them for the different forms I'm using.

My girls (2 and 5) turned the extra pieces into whales!


Question - I cut these out on the router table. I've marked the routing direction on the template - did I have the routing directions correct? The thin tail was a challenge.


Re: WC Weekend Accomplishments.......

#3

Re: Made whales & routing direction question

doug f, san clemente, ca

If my feeble memory works, the router rotation will give you problems on cut #1. The easiest way to fix the problem, IMHO, would be to leave some extra meat at the tail, use your noted cut sequence and finish with #4. That way the rotation will cut nicely off the end; clean cut and no chip out.

Or I may have that backwards. :) :D :D

Doug

Re: WC Weekend Accomplishments.......

#4

Re: Made whales & routing direction question

GolfSteve in Calgary

Cut #1 was easy. It was cut #4 that gave me some trouble as it was seemed to be going in the wrong direction, as well was being on the thin part. Perhaps I should have started with #4 going in the opposite direction and finished with #1.

I rotated the piece as I cut it - all the cuts were made on the table with the piece between the router bit and me.

Re: WC Weekend Accomplishments.......

#5

Re: WC Weekend Accomplishments.......

AZ in Colorado Springs

I completed a table I built for some friends in the style of a kitchen island I made for them last summer. At that time, I started a thread asking about a durable, painted, finishing schedule for a family with lots of kids. I settled on Old Fashioned Milk Paint, covered with wiping oil based (satin) poly. After about eight months it's held up very well. Here's the first project:


I took a couple of photos when it was completed, but the camera ate them. Clint Searl (I think) was contemplating a similar finishing schedule for a library project -- how did that turn out?

Their dining table was (is) a bit unusual at 57" square and 35" tall. I used the same dimensions, but turned the legs in a pattern similar to the legs on the kitchen island, and painted the aprons and legs -- same milk paint & oil based wiping poly. The top is wormy maple, 1/4" roundover on top of the edges, 3/8" RO on the bottom side, and the finish is brushed on satin oil poly. I added one drawer along each side -- you can never have enough drawers. The old table was stained very dark (about the color of the floor in the photo) w/ square legs. The color scheme on the new table brightens the room considerably.