Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Fireplace Insert Surround?

Posts

Fireplace Insert Surround?

#1

Fireplace Insert Surround?

TomD

Can you use Durock, or something similar, to build an enclosure for a fireplace insert, if you don't have the fireplace? My neighbour has the flue in place, but he previously had a smaller gas heater, and he would like to move up to the fireplace, he has one he can use in this space. But he would need to be able to do it in a code friendly and safe way. And it would have to be something he could make look good. I thought maybe durock or cement board, but it was just a guess...

Also are these fireplaces generally designed to be used as full time heaters, in an appropriately sized space?

Re: Fireplace Insert Surround?

#2

Re: Fireplace Insert Surround?

Bill Howatt

You really need to get the specs from the fireplace manufacturer to see if it is zero clearance or whatever and take it from there.

I have a gas fireplace insert retro-fitted in a masonary fireplace and it runs "continually" in the winter months and heats the fairly open living-room, kitchen, dining room area and keeps the furnace off because of the furnace thermostat location. Bedrooms do get rather cool though. We turn it off at night and let the furnace take over. I wouldn't say it is necessarily a cost-effective way of heating but since our furnace is forced-air electric it isn't real cheap to run either. However, the fireplace looks pretty!

I had to replace the fan motor after about 3 yrs of use though.

Bill

Re: Fireplace Insert Surround?

#3

Re: Fireplace Insert Surround?

TomD

Thanks Bill,

Very helpful reply. Since he would be building from scratch, he could accommodate whatever clearances are specified, if he can build his own enclosure. Is that kind of thing common approach? These things are designed to be inserted into an existing fireplace. But he doesn't have one of those. He will need to build it himself, and he isn't going to create a whole brick enclosure. But he has a hearth in place, he just needs to be able to cover the back side of the fireplace with something, to complete the look. Any ideas on that?

Re: Fireplace Insert Surround?

#4

Re: Fireplace Insert Surround? *LINK*

Bill Howatt

Among the vendors are Napoleon and they have inserts, direct vent gas fireplaces, stoves, and a lot of others. The site gives you a lot of info and you can even look at/download the installation manual for the various items.

I think this should give you lots of info.

Bill


Napoleon Fireplaces