Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Custom made dot com

Posts

Custom made dot com

#1

Dale Lenz

Custom made dot com

Dale Lenz

Since Ellis meantion Custommade below and I did not want to high-jack that thread thought I'd tell you all about my experience with them.

Signed up with them for something like 3mo. sold a few flag case, seems to be a money well spent. They never contacted me back after my time ran out, seemed odd. I contacted them again and went for twice my orginal time.

Custom made would market my works and customer would see it and there was a contact button or some such. Well half through my second contract CM decide to change the rules, they wanted a commission for each flag case that sold: That was not part of the Deal when I signed up! Contacted them and talked with the "front-line person", was informed I'd get a call from an higher up...never heard from that person.....Let the contract run out and I won't be back Because of "changing the rules during the middle of the game"

Not really ranting or am I, just telling my experience with them.

Re: Custom made dot com

#2

Re: Custom made dot com

Charlie Lenz

It just goes to show you that it's next to impossible to make a decent buck from woodworking. And I seriously doubt that it's going to get any easier in the near future.

Re: Custom made dot com

#3

Dale Lenz

Re: Custom made dot com

Dale Lenz

Although, CM.C was a semi-bad experience for me, I'm not going to cop a no sale possible attitude and close my shop doors, I'll try something else. Going door to door at funeral homes was an eye opener for me: They Want my Stuff! Then Ebay, My Website. I'm always looking for more markets until I'm ragged out.

Finding markets and capturing sales is quite enjoyable to me. When sales are down it can be depressing, but I know it's probably ain't going to fix it's self.

Re: Custom made dot com

#4

Re: Custom made dot com

Charlie Lenz

I guess that alot of it depends on if a person has a retirement income to fall back on, I don't, so it's hard for me to keep a good attitude towards it all after so many years of struggleing.

Re: Custom made dot com

#5

Dale Lenz

I'll let you know in 2 yrs..

Dale Lenz

But at this point and time I could not make it on my flag case sales. But....then again, if I was in that boat I'd try to market harder. One nice thing is when flag cases are selling, it sure does make $ matter easier. Plus... my feedback from my customers help keep me going.

Re: Custom made dot com

#6

Re: I'll let you know in 2 yrs..

Charlie Lenz

I'm wondering if automation wouldn't be part of the equation in makeing it, but on the other hand it costs alot of money to be automated. There is a automated sheet metal shop here intown which has a website. I was looking through the site the other day and couldn't help but notice that they had cut a very fancy ogee style end in seventeen 4" x 12" cedar beams for a Pergola, with what I'm guessing was a WaterJet machine.

Re: Custom made dot com

#7

Dale Lenz

Some folks jump in with both feet

Dale Lenz

I prefer to test the water gradually. Dan D told me IF my flag case business ever "took off" to get a CNC machine. I'm not there and don't think I ever will be. For one thing at the point I'd need a CNC machine I'd need to of hired help by that point, don't want to become a personel manager, but then again I'm the highest paid floor sweeper in the county.

The entrepreneur myth, E-Myth, a great read, tells you as an enterpreneur with employess that You work On the business, not In the business.

It's our life to do what we want to, within reason. Off my soapbox now, :).

Re: Custom made dot com

#8

Re: Marketing

Charlie Lenz

Have you tried makeing your own website through Google, or some other place, and or placeing an ad in Craigslist ?

Re: Custom made dot com

#9

Dale Lenz

Re: Marketing

Dale Lenz

I built my website in 2005(?) using Yahoo's template, it cost me $15/mo. Dan D. contacted me and ask if he could play with my website, thats what you see now if you go to my website. I've been able to make changes since Dan has been gone, it's a nail biting experience.

The kicker is once you have your website up and running, it doesn't do much good if no one knows it's there, so you need to market your website, that where the money flows out, hopefully you get more sales than the marketing cost. Since I can not find out how to get my website on the first few pages of the search engines, organically, in the main body of the search engines, I've gone with sponsers listing, it's a pay per click thingy. In years past my marketing cost has been somewhere around 17% of my gross sales.

I put one ad in Craig's list did not do any good, guess I could try again, it's free. I've gotten tons of email saying they can get my website on the front page of of the SE, of course I'd don't bite because I don't know how legit they are. Just this past Friday got a reference from a "talking" person about helping me get my website in a decent organic listing on Google, Yahoo etc. Have made the contact and will see how this goes(?).

Re: Custom made dot com

#10

Re: I found your website ....

Charlie Lenz

And you do nice work. I think that part of the problem also is that for most of us is that what we do I would consider as custom work, not high production runs and that increases the prices quite a bit. It's a tough economy for this kind of stuff.

Re: Custom made dot com

#11

Dale Lenz

Thanks, Charlie


Re: Custom made dot com

#12

Automation

John in NM

Always a tough call on small market stuff, I go back and forth on it a couple times a year. Assuming a machine (CNC presumably) can do your work at all, there is no question it can do it faster. The question becomes whether you can put the time saved to profitable use. If the limiting factor is the size of your market, the time saved may not be useful to you and you are out the cost and trouble of setting up a machine to do it for you.

One thing I've noticed repeatedly, we woodworkers are often far less skilled at marketing. I can figure out how to make lots of stuff, often very quickly. Selling it is a whole 'nother bucket of bait :D

Re: Custom made dot com

#13

Re: Know your market ?

Charlie Lenz

Perhaps for people that do work like Dale does, less time needs to be spent on the general public, and more time spent on where the upper class goes.

Re: Custom made dot com

#14

Re: Automation

Charlie Lenz

John, automation can also produce a niche product, such as very intricate carvings that can't be done by hand, but can be done with a laser. Something that would make your product unique, or give it that special touch.

Re: Custom made dot com

#15

Alan Young

Thought I'd join the discussion a bit late

Alan Young

I joined Custommade.com in it's early years-probably 10 years ago maybe longer. In it's early years it was run by a woodworker from Massachusetts I think. I believe his name was something like Ted Webster...It was free to sign up. After a while he started charging $35.00 per year. He finally sold the operation a few years ago. When Ted ran the site it was just for woodworkers. The new incarnation has expanded to cover other types of custom made products. They raised the price too but as a charter member I was "grandfathered" in for reduced fee. Not sure how long that is going to last but I've consistently received 1-3 commissions per year over the years- certainly enough to cover the listing fee. My concern is that there are now so many makers listed on Custommade that it's easy to get lost in the haystack. The most likely way to be found is to have someone looking for a "Michigan woodworker" ... Dale- your work is custom- but you also have a fairly defined product line. I on the other have rarely built the same piece twice....As I "market" myself as a custom furniture maker this fits pretty well for me. I haven't had any situation where they are asking for a percentage off my commissions. I am also signed up on http://www.artfulhome.com/. I have received no work from that site but they do charge a percentage of commission. I also built my own webpage close to 15 years ago- I built it off of homestead.com. It was also free when I signed up. That changed quite a few years ago-still at $119.00 per year I am very happy with the arrangement. The biggest trick is to line your meta tags with pertinent phrases- for me that includes "Michigan woodworker" "custom furniture maker" etc...I have had numerous calls from companies wanting me to pay them $500.00 or more for the "guarantee" of placing me at the top of Google and Yahoo. I have declined all offers to date.

-Alan

Re: Custom made dot com

#16

Dale Lenz

Re: Thought I'd join the discussion a bit late

Dale Lenz

.... Dale- your work is custom- but you also have a fairly defined product line.....

Alan: I appreciate your input but I'm somewhat confused. I agree with your above statement but are you suggesting CM wanted me off their site because my work is not Truly custom work and by charging me a % commission was their way to say go? My first hitch with them was for 3 mo. for 50 bucks, sold a few case, fell under my 17% marketing cost. Then 6 mo. for a hundred bucks, sold maybe two cases and then they came up with the commission thingy. I'm at a loss as why you have not be ask to pay a commission the same as me????

Re: Custom made dot com

#17

Alan Young

Re: Thought I'd join the discussion a bit late

Alan Young

Alan: I'm at a loss as why you have not be ask to pay a commission the same as me???

Dale- At least until recently-all of my commissions coming from CustomMade have come from the client seeing my listing and e-mailing me directly. I do have pieces with suggested prices on my listing.

http://www.custommade.com/by/woodwardwoodworks

We engage in e-mails and phone calls until we agree on a design and price or go our separate ways. CM has had no idea what I charge a client to make a table or cabinet or what ever it is they commission as all that information has been contained in private e-mails- So there has been no way for CM to determine a commission percentage or even know if someone has contacted me. But I do see a new link on my site where the perspective client can engage the design and ordering process-This looks like CM gets into the loop and perhaps that is where a commission fee is generated to CM? I really don't know.

-Alan

Re: Custom made dot com

#18

Alan Young

Upon further review

Alan Young

I see that CM has removed all links to my own webpage and e-mail address. It seems all commissions are certain to go directly through CustomMade and hence I'll no doubt be assessed a fee when any new commissions go through :

humm-not sure I'll be sticking around CM

Re: Custom made dot com

#19

Dale Lenz

Re: Upon further review

Dale Lenz

That's what they did to my page. And that's okay if you both agreed with that up front. Want to say they are charging 3 something %?

Good Luck

Re: Custom made dot com

#20

Re: Upon further review

John in NM

While I can understand your displeasure at having the contract changed like that, 3+% doesn't seem all that bad if there are sufficient sales to make it worth continuing with them. When I started wholesaling my grips rather than selling them individually, I cut the price by 1/3 so the vendor could mark them up to where I'd been selling them individually. The increase in volume has made it well worth it.

But the real difference is that my vendors are much better exposed in our market than I could ever be. Part of the reason I don't try to utilize commission driven sites (my next best option) is that I don't feel they represent my market anywhere near as well as do my vendors.

So I think that would be the real question in dealing through CM, do they effectively help you reach your target market? If so, they do earn that commission. If not, well that one is obvious :D