Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

OT Anybody used Driveway patch?

Posts

OT Anybody used Driveway patch?

#1

OT Anybody used Driveway patch?

Barry Irby

The home center sells asphalt patch in bags. One of my rentals has a paved drive with some holes in it. Anybody used the bags of asphalt patch? How well did it work? Any tips on how to do a good job?

Re: OT Anybody used Driveway patch?

#2

Re: Driveway patch

Mark Mandell - Gone Round In New Jersey

Experience say "temp job, at best". You need to clean out the holes well. I got best results when I heated the hole with a torch, then put in the patch while hot. You'll need a hand tamper or, at least, serious wood (4x4) and a BA hammer (sledge!) to drive it. Figure 5" applied and then beat down to 2" thick.

Re: OT Anybody used Driveway patch?

#3

Re: OT Anybody used Driveway patch?

RobCarr

For asphalt to last it needs to be compacted to get all the air out of it... probably not something you're going to be very successful at with a hammer and a block of wood.... you're probably best off filling the holes with concrete and brushing asphalt sealer on the top so it's not so obvious.