Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

OT Motion sensor security lights

Posts

OT Motion sensor security lights

#1

OT Motion sensor security lights

Howard

I need to replace my security lights (PAR 38 floodlight bulbs) as the sensors have failed after a few of years. New ones seem to range in price between about $ 30.00 for Heath Zenith to $ 100.00 for RAB. Will I be getting longer sensor life with the RAB? Can anyone recommend other brands that have long life sensors?

Thanks

Howard

Re: OT Motion sensor security lights

#2

Re: OT Motion sensor security lights

steve mackay

I've had mine up for 'bout ten years and still go'n. DESA International. Think I gave the Borg twenty bucks for them.

Re: OT Motion sensor security lights

#3

Re: OT Motion sensor security lights

Bob Entwisle in NJ

Seems to be a bit of a crap shoot with the Heath/Zenith (Desa international) products. I installed one about thirteen years ago and the motion sensor crapped out and failed within a year or so. I replaced the motion sensor with another Heath Zenith motion sensor and it's been working fine for the past 12 years. That said I'm sure it will fail tomorrow night.

I should say that my outdoor lights are easily accessible. If they were high up under the eaves, or otherwise difficult to service, I might be more inclined towards higher end fixtures.

bob in NJ

Re: OT Motion sensor security lights

#4

Re: Have to agree

Larry Clinton At Frankfort, (Central) Indiana

I have 2 motion sensor light - both are pretty easily accessible. One is on my house lighting the parking area and one over my shop entrance door. I think both cost between 25 and 40 dollars. The first one I installed on the house several years ago failed within a year or so. It was a dual screw in bulb style. Replaced it with a Halogen type and it lasted 3 or 4 years before the heat of the halogen bulbs destroyed the bulb socket. Replaced it with a screw in type and it is still working after 5 - 6 years (did replace a bulb or two) The one on the shop has been up 5 - 6 years, motion sensor still ok but one of the Halogen bulb sockets has failed - I have one from one of the old fixtures - going to replace that. About 5 years ago I saw a motion sensor only (no fixture) on the clearance shelf for about $5 - bought it, been great insurance since I haven't had one fail since. :>). From what I can tell all the units have a life that is so variable that I won't spend a lot on one. Of course mine are pretty easily replaceable.