What leather for jewelry box bottoms
Dave Winers
What's a good leather that's easy to work with and looks good for jewelry box bottoms? And good suppliers?
Thanks in advance-
Dave
Knowledge You Can Build On — Est. 1998
What leather for jewelry box bottoms
Dave Winers
What's a good leather that's easy to work with and looks good for jewelry box bottoms? And good suppliers?
Thanks in advance-
Dave
Why Leather?
Thomas Skaggs, Foothills of Mount Level
Just curious....why leather istead of a felt or velvet or flocking etc?
Tandy Leather has a large selection.
Tom
Re: What leather for jewelry box bottoms
Ellis Walentine
Here's an educated guess, seconded by my better half: Use suede or ultra suede instead of a smoother, harder-finish leather -- if you need to use leather at all. I would not recommend velvet, as it is too slippery. Slippery linings allow the jewelry to slide around when the drawer is opened or when the box is moved.
Many jewelry boxes are lined with Pacific silver cloth to prevent silver tarnishing as well as to cushion the jewelry. Silver cloth is like flannel, so it has the same sort of brushed texture as suede.
My 2¢,
Ellis
Re: Why Leather?
paul in AZ
I've used felt and leather, and now prefer the leather. Suede rather than smooth leather makes a very nice liner.
The hobby shops have some suede but the best bet is to visit an upholstery shop or someone who supplies upholsterers to choose from their cutoffs and scraps. They should have a great assortment of colors.
I stick it down with Duro all purpose spray adhesive in an aerosol can. There must be others.
That's what I use.
Thomas Skaggs, Foothills of Mount Level
There are no rules and leather is fine. But I use Pacific silver cloth to reduce tarnish.
T.
Re: What leather for jewelry box bottoms
Jesse Cloud
Darn near any leather will work. Choose something that looks good to you. Tandy is a great source. The one here has big bins of "scrap", usually something like a foot wide and 2 or three feet long. They sell the scraps by the pound - just ridiculously cheap. Glue it with contact cement to your rough cut bottom and then you can trim it along with the bottom on your table saw.
In my opinion, leather is a very elegant material, especially for desks, jewelry boxes, etc. And, unlike velvet, flocking, etc. it lasts forever.
Re: What leather for jewelry box bottoms
Howard
I use suede from www.brettunsvillage.com/. Glue it to 1/8 inch plywood with Titebond II
Mostly agree *LINK*
David Barnett
"I would not recommend velvet, as it is too slippery. Slippery linings allow the jewelry to slide around when the drawer is opened or when the box is moved." - Ellis
Well, there's velvet, and then there's velvet. Real velvet's my choice to exhibit and store my silver and gold. The jewelry doesn't slip or slide or bunch even though I cushion my box and display case drop-ins with a pronounced slope to the sides. Fine velvet (silk, Kashmiri wool, some mohair) is definitely expensive, but has an amazing look and feel that's at best only burlesqued by fabric retail chain and to-the-public store velvets (synthetics or synthetic-cotton mix), which are slippery.
You'll usually need to purchase the good stuff through interior designers or furnishing and fashion insiders, although occasionally you can find nice remnants on eBay without Tesla-level sticker shock. To me it's well worth it. Of course, if you recess or fit (French or English) your drop-ins, slipperiness wouldn't matter.
"Many jewelry boxes are lined with Pacific silver cloth to prevent silver tarnishing as well as to cushion the jewelry. Silver cloth is like flannel, so it has the same sort of brushed texture as suede." - Ellis beat me to it
Pacific Silvercloth is reliable, inexpensive, and acceptable looking (any color so long as it's brown*), but with 3M Anti-Tarnish strips and squares (which the makers of P. Silvercloth also offer), I much prefer fine velvet teamed with 3M strips. The disposable 3M strips protect better than Silvercloth, in my opinion, and as they are replaced once or twice a year, continue aggressive absorption of airborne sulphur compounds (neither Silvercloth nor 3M strips emit anything -- just absorb).
Even if you choose Silvercloth, it's not a bad idea to throw in a couple 3M strips now and then, especially if you live where there's lots of traffic or smoke-belching industry. The strips are also handy for traveling with jewelry, as well.
It's really difficult to know what you're getting in suitable leathers nowadays, and many attractive suedes have tanning and finishing residues that are not so good for jewelry. Some archival book arts leathers are okay, and I've used untanned skins (vellum) to nice effect for single piece boxes, both inside and out, but do design in a subtle pocket for 3M strips or tuck a couple in the lining, at any rate, if you go with leather. [Probably a good place to disclaim any connection to 3M.]
Microfibers (Ultrasuede, et al) are popular these days for commercial jewelry display. The jeweler's supply catalogs are full of suedey-looking display boards and boxes. Although I don't use microfibers, I rather like the stuff, and you can buy it everywhere. Lots of tasteful colors. Cheap, too.
I guess the takeaway here is 3M strips. They really help keep jewelry wearable and bright, which means less polishing, which means less abrasion, hence greater longevity. Really extends the range of design choices, too. It's not just for Sterling or lower karat golds, either -- even Argentium™ and fine silver will eventually darken without intervention. My 22k gold, not so much, heh.
*Genuine Silverguard Pacific Silvercloth® is always brown. There are imitators that offer other colors, however.
One source for 3M Anti-Tarnish Strips