We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
While frying the Thanksgiving turkey in peanut oil, I spilled some on the concrete patio. It hasn't been nice enough weather on the weekend's to worry about it till now. Any suggestions on how to remove peanut oil from concrete?
Try Tide laundry soap, that's what the crews who clean up wrecks on NASCAR tracks use. There's probably some sponsorship deal involved but you might give it a shot.....I doubt they'd use it if it didn't work. I've never tried it but it's probably a cheap place to start.
Part of the problem, of course, is that the oil soaks into the porous concrete. I change my car oil in the driveway because I don't have a garage, and have now and again spilled some. I've found mineral spirits, scrubbed with a toothbrush or similar until it's black, brings the oil in the top level of the concrete up to the surface. I then soak it up with kitty litter - the cheapest kind (the clumping kind, while great for litterboxes, is not so good for this cleanup). You can still see a faint residue of oil, but it's far enough below the surface not to be an issue.
Tri-Sodium-Phosphate is still available. Some paint stores, Ace hardware, and firms that specialize in fire clean-up usually carry it. There is a substitute for true TSP also called TSP but actually something else.