Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

OT-sort of ipe/Brazilian walnut flooring

Posts

OT-sort of ipe/Brazilian walnut flooring

#1

OT-sort of ipe/Brazilian walnut flooring

Jacob Dahn

It has been decided we are going to put hardwood flooring in our main level. She has fallen in love with brazilian walnut/ipe. we can get the prefinished stuff from a number of sources. But are concerned about the dirt collector edges that are present. We have three young boys and the floor sees a ton of traffic. My knowledge of ipe is nil. I assume a cleat nailer would be necessary if I was to install this myself.

Does anyone have a supplier they recommend for pre finished and or unfinished? Also any experience in have it sanded and finished on site? Any pitfalls or gotchas? I would hire someone to sand and finish on site. Not something I want to tackle.

Thanks

Jake

Re: OT-sort of ipe/Brazilian walnut flooring

#2

Re: OT-sort of ipe/Brazilian walnut flooring

Dave Paine

Ipe is a VERY dense wood. It is common to pre-drill and screw for decking.

For use in flooring, I do not know if pre-drilling is required vs desired. The pneumatic nailers may be able to penetrate, although I do not know if some nails will bend.

I recommend doing a test first, before you decide on the installation method.

Some flooring is thin veneer of the primary wood and another wood, maybe MDF for the substrate.

IPE being dense should stand up well for high traffic. The finish may be another matter.

Re: OT-sort of ipe/Brazilian walnut flooring

#3

Dave is right.....

Dick Coers

That stuff is like rocks! I can't imagine getting any nails through it without drilling. Definitely not within 10" of the end of a board. Here's some info I found on a flooring site. Guess I wouldn't want to cut too many boards from the sound of it either!

Brazilian wood can be quite difficult to saw, and work with hand tools and is moderately difficult even with more modern options. Sanding this type of lumber is also difficult because of the density and the oily residue found on the wood. Scratches from processing are easily visible, and the sanding process must remove all scratches from the previous cut very carefully. Failure to do so will result in sanding marks and scratches that are visible after the lumber has been finished. Because of the density of the wood, it can also be quite difficult to nail. The preferred method is hand nailing, and pre-drilling the lumber may be required. Finally, all finishes should be tested prior to being applied to the flooring. Some finishes, such as those that are oil-modified, will require an extremely long time to dry. When working with Brazilian walnut, be aware that it can cause contact dermatitis in some individuals and may also cause some respiratory difficulties.

Re: OT-sort of ipe/Brazilian walnut flooring

#4

Re: Dave is right.....

Jacob Dahn

Thanks for the reply. Sounds like wonderful material to work with. Well have to see how this all works out.

We are meeting with a flooring installer on Monday. Just trying to have at least a little knowledge o the material before he comes. I have installed t&g oak and laminate before, I figured this was a different animal and it sounds like I was on target.

Re: OT-sort of ipe/Brazilian walnut flooring

#5

Jason Roehl in Lafayette, IN

Also...

Jason Roehl in Lafayette, IN

Don't ambush your potential installer. Depending on your locale, you may or may not be able to find an installer with knowledge and/or experience with that wood as a flooring. Even if he doesn't know anything about it, I would go by whether he is willing to do the due diligence to learn and get it right. Being an expensive wood, he may not want the risk, either.

If you're confrontational up front, I'm sure it won't be a fun job for either of you.

Jason

Re: OT-sort of ipe/Brazilian walnut flooring

#6

Re: Also...

Jacob Dahn

Thank for the input. I have no intention of ambushing him. I've heard he is easy to work with and we are still deciding on if we want to attempt the install. Sounds like he has worked with some of the tropical hardwoods in te past. He services an arer with mid to upper level homes. I really don't want to be his first excursion into ipe.....

Re: OT-sort of ipe/Brazilian walnut flooring

#7

Re: OT-sort of ipe/Brazilian walnut flooring

Mike Brazeau

We installed (myself, my BIL and a hired handyman) prefinished exotic walnut 9 years ago in an area that is now kitchen. It is in the IPE family. Three years ago, I tried to match it and was told Sucupira was equivalent and I installed it myself. Both were very hard and got some splitting of the tenon if the nailer slipped. The exotic walnut really darkened into a very uniform color in a few months. The sucupira boards are retaining their original color producing more variation. Both make a beautiful floor and stand up very well. I would never install sand/finish in place flooring. Have done lots of Bruce oak over the past year for kids & friends. Installing hardwood is not difficult. Bit rough on the knees. I sit on a small stool and saw outdoors if at all possible. Get lots of exercise walking to and from the saw.