Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Some help on wood selection

Posts

Some help on wood selection

#1

Some help on wood selection

Frank Orfanello

Hi,

I want to build this clock

The one in this picture is made from QS Sycamore and Walnut.

I can't find QS sycamore around here.

Does anyone have a suggestion for another wood that may be more generally available would give me a similar look?

Thanks

Re: Some help on wood selection

#2

Re: Some help on wood selection

John McGaw

Australian lacewood (quartersawn Grevillea Robusta) might do in a pinch for smallish projects. Both quartersawn American sycamore and this wood share the sobriquet 'lacewwod'.

I'm really surprised that you can't find the QS sycamore though. It isn't really that rare, at least around here, and I can usually get in in quantity if I want it direct from the sawyer. Or, in a pinch, any number of online sellers have it. I have four slabs of flitch-matched sycamore of this sort in the shop now -- enough to build a 10-foot dining room table if I ever get around to it although I had to travel all the way to Pennsylvania to get wide pieces of high quality.

Re: Some help on wood selection

#3

Re: Some help on wood selection

Dave Paine

John replied before I read the post.

Lacewood is the more common name I associate with this grain pattern.

The attached picture should illustrate the Lacewood insert close to the middle.


I love the grain pattern, although can be rather soft. It would be a good wood for a clock.

Re: Some help on wood selection

#4

Re: Some help on wood selection

Dick Coers

Quarter sawn red maple would have some flecking, not as big as sycamore. Quarter sawn beech would be closer.

Re: Some help on wood selection

#5

Re: Some help on wood selection

Frank Orfanello

I was looking at QS Beech and wondering what that would be like. I might pick up a piece and give it a try.

Thanks for your help.

Re: Some help on wood selection

#6

Re: Some help on wood selection

Frank Orfanello

John and Dave,

Are you suggesting QS Lacewood? The large supplier near me (Downes and Reader in Stoughton MA) has lacewwod but not QS.

It did look attractive. I might pick up a piece of that too.

Thanks for your help

Re: Some help on wood selection

#7

Try Woodfinder

Don Orr

www.woodfinder.com run by our own boss Ellis.

Re: Some help on wood selection

#8

Re: Try Woodfinder

Frank Orfanello

Thanks Don.

I actually tried that first. The first 3 listings didn't have qs, two didn't have sycamore at all. After that I was 100 mi or more out from home. I don't need much and I do have some pretty well stocked suppliers around here so I thought changing species would be easier.