Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Motor Wiring Help (shot in the dark)

Posts

Motor Wiring Help (shot in the dark)

#1

Motor Wiring Help (shot in the dark)

Thad Parker

My bro-in-law gave me a motor with no plate on it, so I don't know much about it other than it's single phase and 115v, with 7 leads. It came out of an industrial kitchen vent hood.

Going off the physical size, it could be a 3/4 or 1 hp which I would love to use to replace the 1/2 hp I've got the bandsaw. I know you can't really determine much from the physical size though.

I believe the nearest motor shop is at least an hour away, so I'm hoping that someone here may be able to offer me some direction (though I know I probably cannot provide enough information).

Here are the leads if that helps anyone:

white - T2/V1

black T5/V2

red - T8/V3

yellow - T4/U2

blue T1/U1

orange - T3/W1

brown - 7/P2

There are no other markings or labels on anything.

Thanks for any help or direction anyone may be able to offer.

~ Thad

Re: Motor Wiring Help (shot in the dark)

#2

Re: Motor Wiring Help (shot in the dark)

Keith Newton

Jut want to make sure,,,,,,,,,,, You did look on the underside of the wiring cover?

It is sometimes under there, and easy to miss, if you lay it aside.

Re: Motor Wiring Help (shot in the dark)

#3

the wiring cover is gone...


Re: Motor Wiring Help (shot in the dark)

#4

Re: Motor Wiring Help (shot in the dark) *LINK*

John McGaw

Not much to go on but seven leads is a fairly odd arrangement in my experience. You might try looking at the first diagram on page 183 in this PDF to see if you can work out some sort of continuity test to confirm the wiring.


WEG Diagrams

Re: Motor Wiring Help (shot in the dark)

#5

Thank You John...I'll take a look


Re: Motor Wiring Help (shot in the dark)

#6

I think you found it John,

Thad Parker

the color numeric indicators match perfectly for the dual voltage / reversible rotation wiring diagram.

I'll try this set-up when I get home.

Now I just need an accurate way to determine the hp of this thing.

Thanks again.

Re: Motor Wiring Help (shot in the dark)

#7

Re: I think you found it John,

J Barrett Irby

Motor name plates list Running Load Amps (RLA) and Locked Rotor Amps (LRA). One is with the shaft spinning at full speed and the other is with the shaft locked and sitting still. The locked Rotor Amps may be five times the running load. I wonder if you could fire this thing up and use an Amprobe or similar device to read the current draw and convert that to horse power? I have forgotten what the exact number is but a horse power is about 790 watts. Most residential blower motors are fractional horse power.

Re: Motor Wiring Help (shot in the dark)

#8

Re: I think you found it John,

Bill Turpin in WNC mountains

A HP is 746 watts. Unfortunately motors are not 100% efficient. Therefore you can't do simple math to get HP. Amps times volts is watts. Take amps times 120 = watts, divide by 746 to get HP mutiply by .85 for eff loss. This will give you a big guess. A motor drawing 6.5 amps would be "6.5 *120 /746 * .85= .88 HP." Probably a 3/4 or 1 HP. Motor HP is one of the biggest LIES going. So if the amp draw is at least 25% more than old motor, it is probably bigger.