Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

A couple of projects I've done

Posts

A couple of projects I've done

#1

A couple of projects I've done

Gary Bindel


I made this mirror for someone my wife worked for. Making it was the easy part. Mounting it was one of the most difficult things I've done. Each section weighs about 80lbs. The bottom of the mirror is 16" above the mantle which is 66" from the floor. The mirror is 52" wide by 11' tall made of cherry with a poly finish.

The crib below I made for my most recent granddaughter, (now 8 mths old). It is made of walnut with a shellac finish. It will become a double bed when she gets older. It came down to the wire as I set it up the day she was coming home from the hospital.





And this is the little lady that the crib was made for.

This is my shop dog, Kiiro which is Japanese for yellow. We were on a walk and he decided to cool off.


Re: A couple of projects I've done

#2

Beautiful!

Bill Houghton, Sebastopol, CA

Very nice work. And a loverly granddaughter.

Re: A couple of projects I've done

#3

Re: A couple of projects I've done

George Colonel's Workshop-Havertown PA

Good Afternoon Gary,

The mirror almost equals the perfection of your grand daughter. I can imagine the difficulty you experienced hanging the mirror, especially the weight of it. Getting it "right" in the space available is a major distraction for me. A tad this way and a smidgen up on one side doesn't ever seem to hack it for me. You, my friend, got it right.

George

Re: A couple of projects I've done

#4

Ellis Walentine

Archimedes' lever

Ellis Walentine

Don't you just love challenges? Hanging a mirror that size must have been as much fun as it was difficult. When you say each section weighed 80 lbs, which are the sections. I see three Palladian structures there. Did you make all three, or just the central unit? Anyhow, it came out very nicely.

As for the Empire-flavored crib/bed, I love the concept. I'm wondering if 54" is the standard length of a crib mattress?

Thanks for posting these.

Ellis

Re: A couple of projects I've done

#5

Re: A couple of projects I've done

Gary Bindel

Thank you for the nice comments.

It is next to impossible to get the hangers perfect on the wall. You only have to be off by a hair on the horizontal to have it veer off verticle rapidly. I had put locating pins between the sections, but needed each section to be self supporting. What I found I had to do was to make the hanging points on the mirror sections adjustable so I could level each section.

Re: A couple of projects I've done

#6

Re: Archimedes' lever

Gary Bindel

The standard crib mattress is 52" in length.

Re: A couple of projects I've done

#7

Re: A couple of projects I've done

Carlos Clarke

Gorgeous work.

Do you have plans for this crib?

It is exactly what I want to make for my grand daughter.

Re: A couple of projects I've done

#8

Re: A couple of projects I've done

Bill White

Where did that baby get that little fat face? She's a sweety.

Bill

Re: A couple of projects I've done

#9

Re: A couple of projects I've done

Gary Bindel

From her dad.

Re: A couple of projects I've done

#10

Re: A couple of projects I've done

Gary Bindel

I don't have any plans as it is a combination of a couple different cribs and my imagination. I can do up some rough sketches if you want.

Re: A couple of projects I've done

#11

Re: A couple of projects I've done

Carlos Clarke

Thanks but I'll stop being lazy and draw some up.