Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Hand rail wood "reclamation"

Posts

Hand rail wood "reclamation"

#1

JL

Hand rail wood "reclamation"

JL

I was gifted with a lot of 6/4 oak hand rail wood. The wood is ~6/4 x 8" x ~10' long. It has some finish on it as well as some surface grime.

I don't have a drum sander. I have a belt sander and a planer.

I was going to use an 80 grit belt and go over it lightly and then use my planer.

Any other suggestions?

TIA.

Re: Hand rail wood "reclamation"

#2

Re: Hand rail wood "reclamation"

Dave Bair, Eaton Rapids, MI

I never machine after sanding; grit gets into the wood and dulls my planer blades too quickly. You might wash your rail with mineral spirits or wire-brush the surface clean.

Re: Hand rail wood "reclamation"

#3

Re: Hand rail wood "reclamation"

Bill Tindall

I am not a fan of machining wood that has been sanded for fear of left behind sanding particles. To remove grit from wood I use a wire brush on an angle grinder and then plane it. The wire brush takes to surface off the wood right down to bare wood.

Re: Hand rail wood "reclamation"

#4

JL

Wire brush works for me.

JL

Also a lot quieter than the sander.