Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

End grain cutting boards *LINK*

Posts

End grain cutting boards *LINK*

#1

End grain cutting boards *LINK*

mdclor

I think I would like to make a few of these. Does anyone know of a reference that gives the plan/layout for a number of different designs? There are a few different designs at the below link, but I would like to see some other designs along with the plans to produce them.

As always, TIA,

Merle


Cutting Boards

Re: End grain cutting boards *LINK*

#2

Re: End grain cutting boards

Dave Paine

I can show you pictures of my boards, but since I do not work from plans, this is all I can provide.

If any of these inspire you, send me an email and I will try to provide more details on the construction/design.

I see pictures of other people's work, or just get inspired. It is normal for me to start with a design in mind, and it may evolve to something completely different by the time I finish.

My first, and so far only end grain board.


A project completed over the holidays.


A board from couple of years ago.


A board from 2010.



Another board from 2010.


Re: End grain cutting boards *LINK*

#3

Re: End grain cutting boards *LINK*

Bruce, a MN Galoot

Merle,

Here's a three-part series on youtube that's not bad. Anyway, it's a good starting place.

Bruce


The Wood Whisperer

Re: End grain cutting boards *LINK*

#5

Re: End grain cutting boards

mdclor

Dave, those are too nice to actually use as cutting boards. Great looking work. Thanks for the inspiration.

Re: End grain cutting boards *LINK*

#6

Re: End grain cutting boards

mdclor

Bruce & Paul, that is exactly what I wanted. I am beginning to get a sense of what the final project might look like before I start cutting. Thanks, again.

Re: End grain cutting boards *LINK*

#7

Re: End grain cutting boards

Tom

End grain boards are nice but I've turned to making cutting boards from "plyboo"--plywood made from bamboo. Easy to make, virtually indestructible, easy to finish, won't dull knives etc. Can easily embellish with other woods if more contrasting is desired. One can make cutting boards with endgrain plyboo if one can find suitable number of cutoffs left over from thick kitchen counters,etc.

And the "tree huggers" love plyboo because it is a very renewable form of wood!

Re: End grain cutting boards *LINK*

#8

Re: End grain cutting boards

mdclor

Tom, thanks for the suggestion. I would never have thought of ply-boo, although I wonder if the glue in the commercial product would be food safe. Maybe I will try some once I am thoroughly familiar with the process. :)

Re: End grain cutting boards *LINK*

#9

Re: End grain cutting boards

Tom

I asked that question some years back and was told the glue used to make the plyboo is food safe, otherwise it could not be used for countertops, etc. I use plain old waterproof Titebond to glue the pieces together and no one that I know of has keeled over from it. I also would say "just how much of that cutting board are you going to eat"!

Re: End grain cutting boards *LINK*

#10

I don't know.....

paul in AZ

but sliced really thin; served on gluten free organic bread with organic mustard there could be a market out there for edible plyboo.

Re: End grain cutting boards *LINK*

#11

Re: I don't know.....

Tom

Plyboo shavings would make a nice "hot dish"--hmmm, may be onto something...:)

Tom

Re: End grain cutting boards *LINK*

#12

Finished product

mdclor

I thought some of you might enjoy seeing my first end grain cutting board. I realize that it is not fancy like some of the ones at the various links that were provided for me, but I am happy with it for a first attempt. The more complex ones may be later projects now that I have gotten a little experience.

The woods are cherry, maple and black walnut. It is about 12" square and is 3/4" thick. The finish is plain mineral oil with only one heavy coat so far. It was a fun week end project.

Thanks for looking,

Merle


Re: End grain cutting boards *LINK*

#13

Bravo!


Re: End grain cutting boards *LINK*

#14

plybo may taste better than gluten free bread

Dick Coers

and I should know. Been gluten free for 5 years now.

Re: End grain cutting boards *LINK*

#15

Re: Finished product

George Colonel's Workshop-Havertown PA

Good Evening Merle,

That is a very nice job. I love the way the angles mesh tightly. It would be a shame to put a knife to it, not withstanding its purpose. And, it will look more beautiful following final finish.

George

Re: End grain cutting boards *LINK*

#16

Re: Finished product

Jesse Cloud

Beautiful! Please tell us how you did it!

Re: End grain cutting boards *LINK*

#17

Moses Yoder

Re: Finished product

Moses Yoder

The board looks good. I shave some beeswax into a glass pint jar then pour in enough mineral oil to cover it. Then set in another pan of water on the stove (like a double boiler), heat until the beeswax melts, stir, pull out of the hot water and allow to cool. Then use a rag to apply to the cutting board.

Re: End grain cutting boards *LINK*

#18

Holy cats !

steve mackay

The Matrix in wood !

Re: End grain cutting boards *LINK*

#19

Re: Finished product

Randy Gleckler

Very nice, great pattern. You did a great job on it.

Re: End grain cutting boards *LINK*

#20

Food safe in general...

John in NM

All the marketing hype aside, I think you'll find that fully cured, waterproof glues and finishes of most types are food safe. Anything that is more or less inert in one's stomach will be "food safe", in addition to all those things like raw oils that do little or no harm, whether inert or not.

My dad claimed to know a guy in the 1970's with a bentonite quarry (a clay used for kitty litter among other things). Finding the bentonite market a bit soft, he supposedly started marketing his own kitty litter with the claim of being "Arsenic Free!".... of course so was all the other kitty litter, but he was the one who put it on the bag, allowing the consumer to draw their own, erronious, conclusions.

But it was not always wise to believe everything my dad claimed :D :D :D

Re: End grain cutting boards *LINK*

#21

Re: Food safe in general...

paul in AZ

thank you John for adding this bit of common sense.

Too many folks today buy into the 'food safe' hysteria with glues. Its as if fully cured glue trapped within a joint is the same as ladling a couple of tablespoons of it onto your cereal. cheesh!

Re: End grain cutting boards *LINK*

#23

Re: plybo may taste better than gluten free bread

mdclor

I guess that I shouldn't have disparaged plyboo out of hand, but I was thinking that the glue might be urea formaldehyde which might impart an unpleasant odor to the cutting board. However, I have been known to be wrong before and will be wrong some more in the future. Mea culpa! :)

Re: End grain cutting boards *LINK*

#24

Re: Finished product *LINK*

mdclor

Jesse,

Paul in AZ provided a link that ultimately got me to the link below. The author gives very good instructions for the process, which I modified slightly. Once you get the general idea, it is quite easy to make a basic end grain cutting board. However, in further research, I found that there are scores of different designs that are all amazing. These are the ones to which I aspire.

A funny side note, when I mentioned that I wanted to make a cutting board, LOML said to not make one for her since she has a few in the cupboard that she never uses. However, when she saw the completed product, she decided that it turned out much better than she expected and a slightly smaller one might be nice! Just now she indicated that maybe she will keep this one! LOL


Scrap cutting board instructions

Re: End grain cutting boards *LINK*

#25

Re: Finished product

mdclor

George,

I have learned a few things relative to end grain cutting boards since I initially posted last week. First, since it is end grain, knives split the grain and then the grain closes up again so it doesn't do as much damage as you might think. Second, use one side and keep the other side as the display side. Finally, it is only scraps and we all have scraps we don't know what to do with, so when this one gets worn out, I will be able to produce another one in about 10 hours. :)